Classify the printed assembly, not the tray location
Cable stored in a tray or found near a control system is not automatically a particular product type. Start by transcribing the complete printed designation, such as TC, TC-ER, PLTC, or another actual legend, and attach the transcription to one reel or continuous piece. Pair it with the manufacturer and part number when those are available.
The City of Montgomery says its Development Division is managing three District 7 infrastructure and master-planning projects focused on infrastructure, connectivity, walkability, safety, streetscape design and neighborhood revitalization. That project context may explain why a seller wants a careful inventory record, but it does not establish the type, ownership, or availability of cable on any project.
- Printed designation exactly as visible
- Manufacturer and part number when present
- Reel or piece reference
- Photo reference that shows the marking area
Separate the multi-conductor differences
Create a distinct line whenever conductor count, pair count, gauge, shielding, jacket, or fitted ends differ. A location label such as “control room” is useful as a storage note, not as a way to combine different constructions. This narrower sorting is the central seller task for control and tray inventory.
For shielding, report only what a marking, an existing product record, or a plainly visible feature supports. Do not make a destructive check merely to complete a field. If the shield type cannot be determined from the available evidence, write “unknown shielding” and keep the item apart from verified lines.
- Conductor count
- Pair count
- Gauge
- Shielding status
- Jacket designation
- Fitted-end difference
Keep the quantity attached to the construction
Record continuous footage for each reel or cut length as measured, documented, or estimated. If several reels truly share the same construction, retain the reel count and per-reel footage instead of reporting a single long length. This keeps a group from hiding partial reels or pieces with different evidence.
Add visible jacket condition and the known history, such as uninstalled stock, project overrun, or previously used cable. The condition record helps describe the offered item, while the designation and conductor fields still come from the physical marking or matching documentation.
- Continuous footage and quantity basis
- Reel count when genuinely identical
- Visible jacket condition
- Known history
- Storage location and release authority
Resolve incomplete markings without guessing
Photograph the legible part of the jacket, the overall reel or cut end, and any product label that remains. Then create an “unknown designation” line with the details that can be observed: count, gauge if supported, visible condition, footage basis, and fitted ends. Do not recast the item as Type TC just because it came from a tray.
The common inventory mistake is treating prior tray location as a product specification. The resolution is simple but specific: retain the actual marking, separate multi-conductor variants, and preserve the unknown as an unknown until a matching record is available.
- Marking-area photo
- Separate unknown-designation line
- Evidence basis for each reported field
- No inferred Type TC label
Worked fictional control-cable record
Illustrative only—not a purchased Montgomery lot: CT-MG-01 carries a TC-ER marking and is listed as 12 conductors, 16 AWG, with 240 feet measured. Its condition note says previously used cable with fitted ends present and shielding unknown. The entry remains one specific construction, rather than a generic “tray cable” label.
This fictional record demonstrates the desired comparison point for a reviewer: printed designation, count, gauge, footage basis, history, and the single unresolved shield field are visible in one place.
- Reference: CT-MG-01
- Identity: TC-ER; 12 conductors; 16 AWG
- Length: 240 ft measured
- Status: fitted ends present; shielding unknown
