Use the jacket designation, not the tray location
Start each line with the exact printed designation, such as TC, TC-ER, PLTC, or another readable product marking, then add the manufacturer, complete part number, marked voltage, and jacket legend. A cable found in a tray is not automatically Type TC. The actual assembly, not its former location, is the basis for a useful control or tray cable record.
If the designation is unreadable, preserve a close photograph, record the readable text, and mark the rest unknown. Do not use an aisle name or an installer’s description to supply a missing product type. That keeps uncertainty visible instead of turning it into an assumed specification.
- Printed designation and full jacket marking
- Manufacturer, part number, and voltage marking
- Reel reference and matching close-up photograph
Split small construction differences before they disappear
Put different conductor counts, pair counts, conductor sizes, shielding, and jacket constructions on separate inventory lines even when the reels look alike. State the field values explicitly, including unknown shielding. One high-level label cannot show whether two multi-conductor reels are actually the same construction.
The common mistake is grouping all cable that came from a tray as Type TC. Correct that record by comparing each readable jacket marking and matching document, then splitting the list by construction. Keep the original reference with every new line so photos and remaining footage can still be matched.
- Conductor count and pair count
- Conductor size, shielding, and jacket construction
- Separate line for every materially different reel or piece
Keep condition and footage at the reel level
For each identified construction, record the continuous length and say whether it is measured, documented, or estimated. Describe fitted ends, visible jacket damage, storage location, and whether the cable is uninstalled, project overrun, or previously installed. A roll with unknown footage should stay on its own line rather than borrowing a neighboring reel’s count.
Provide the release authority and seller-reported access limits with the inventory line or location group. If a data sheet exists, identify which reel it applies to; if it does not resolve an uncertain field, leave that field unknown. These facts organize a review without asserting that any material will be accepted.
- Continuous length and quantity basis
- Fitted ends, visible damage, and condition history
- Storage location, release authority, and access limits
Keep the local context proportionate
The Arizona Commerce Authority profile lists transportation, warehousing and utilities as 8.6% of Avondale employment, manufacturing as 7.2% and construction as 7.1% (ACS industry table).
That employment table is local context only; it does not identify a customer, a cable lot, or purchasing demand. Its modest relevance is that a warehouse, manufacturing, or construction inventory may need a disciplined line-by-line distinction between multi-conductor products. The decision on this page still rests on the seller’s actual markings, reel records, and condition facts.
- Do not infer product construction from a workplace or storage area
- Use local context only after the reel-level record is complete
Illustrative control and tray cable line
Illustrative inventory example—not a purchased lot: CT-AZ-01 has a photographed TC-ER marking, 12 conductors at 16 AWG, unknown shielding, 240 ft measured continuous, and previously installed cable with fitted ends. The example records one specific construction while preserving the unknown shield field.
An actual list should add the manufacturer, part number if readable, marked voltage, photo reference, storage location, release authority, and any matching data sheet. Keep an uncertain designation uncertain rather than recasting it as a more favorable cable type.
- Reference: CT-AZ-01
- Designation: TC-ER marking photographed
- Construction: 12 conductors, 16 AWG; shielding unknown
- Quantity: 240 ft measured continuous
