Identify the cable before describing its weight
Start with the visible label, jacket print, or matching manufacturer record. Record construction, metal evidence, size, insulation, and marked voltage where supported. Keep bare conductors, insulated single conductors, and multi-conductor cable on separate lines because a shared metal word does not make their construction identical.
If metal or construction is uncertain, say so. A silvery appearance, a pallet note, or a nearby reel is not enough to convert an uncertain line into identified copper inventory. Clear photographs should be tied to the reel ID or cutoff group they actually show.
- Manufacturer part number or jacket legend
- Construction and insulation
- Metal evidence and size
- Reel ID or separate cutoff grouping
Keep continuous length separate from short pieces
For a reel, record the amount as continuous footage, along with reel count and the measurement basis. For short pieces or assorted ends, use a separate mixed-piece line. Do not add several cut lengths together and present the result as one continuous cable length.
Condition belongs with the quantity record. Note whether the reel is full or partial, what is visible at the ends, and any known storage or handling exposure. When footage is unavailable, use unknown rather than estimating a precise length from a loaded-reel weight.
- Continuous footage per reel
- Measured, documented, or estimated basis
- Reel count and full or partial status
- Cutoff grouping kept separate
Name the basis of every scale figure
A scale ticket is useful only when the record explains what was weighed. State whether the figure is gross loaded-reel weight, cable-only weight, net weight, or an estimate. Identify known included materials such as wood, steel, packaging, or fittings. Do not restate gross weight as conductor weight without supporting documentation.
A cable-only weight can remain unknown even when a total loaded reel has been weighed. Attach the measurement source and date if available, then preserve the distinction rather than producing a calculation that the seller cannot support.
- Weight number and unit
- Gross, cable-only, net, or estimated basis
- Included reel or packaging material
- Measurement source
Keep local context from becoming a market claim
Mesa’s Office of Economic Development describes available industrial space and shovel-ready sites, plus a skilled, growing workforce supported by STEM education and industry partnerships.
This official context may help frame a commercial inventory record, but it does not prove that a Mesa copper lot exists, establish a local customer, or indicate purchasing demand. The actual product and quantity evidence remain the useful information for this page.
- Local context is not a transaction record
- No location-based weight assumption
- Use the actual reel record
Show an honest partial-reel example
A suitable format is: “MESA-CU-03; identified insulated copper conductor; part number recorded; 900 lb gross loaded-reel weight; conductor weight unknown; continuous footage not documented; partial reel.” This is an illustrative inventory example—not a purchased lot. It leaves the unknowns visible rather than calling the scale figure a copper total.
Match label photos, scale tickets, location, ownership, release authority, and loading access to the same reel record. Keep mixed short pieces on their own line. The buyer can then review the evidence without a misleading conversion of wood, insulation, and cable into assumed conductor weight.
- Photo and scale-ticket references
- Owner and release authority
- Location and loading access
- Unknown conductor weight stated plainly
