Capture the printed designation before sorting reels
Start with the jacket, reel tag, or matching product document. Transcribe the complete printed designation, such as TC, TC-ER, PLTC, or other wording exactly as it appears, alongside the manufacturer, part number, and marked voltage. A tray location does not establish the cable type.
Photograph enough of the printing to connect it to the reel or continuous piece. If the designation is partly unreadable, record the readable characters and mark the remaining designation unknown. Keeping an unknown field visible is safer than labeling all tray-found cable as one product.
- Printed designation copied exactly
- Manufacturer, part number, and marked voltage
- Reel or line ID matched to a legible photo
Split the construction differences that photos conceal
Create separate inventory lines whenever conductor count, pair count, gauge, shield arrangement, or jacket differs. Similar exterior photographs can conceal an individual shield, an overall shield, a different pair count, or a different construction. Those are material inventory differences, not minor formatting choices.
Do not consolidate lines merely because they came from the same tray or storage area. When two reels are genuinely the same, retain their separate lengths and condition notes even if a group quantity is also useful. When a field cannot be verified, use unknown rather than a guessed match.
- Conductor count and pair count
- Gauge and shield arrangement
- Jacket construction kept as its own field
Record continuous length, fitted ends, and condition
For every reel or piece, state the continuous length and whether it is measured, documented, or estimated. Record fitted ends and a clear condition category, such as uninstalled stock or cable taken out of service. The quantity basis should describe feet, reels, or pieces without turning separate segments into one continuous run.
When cable is mixed or only partly marked, keep it on a separate line with its specific uncertainty. A useful inquiry can include incomplete material, provided the confirmed lines do not inherit unverified attributes from the mixed line.
- Continuous length and quantity basis
- Fitted ends and condition category
- Measured, documented, and estimated quantities distinguished
Match every supporting record to the same line
Add a document reference and record date only when the document supports the same reel, part number, or inventory line. State the matching line and what the record proves. A record for a neighboring cable may be retained as background, but it cannot establish shielding or pair count for the offered line.
The specific mistake for this material is classifying all cable taken from a tray as Type TC and combining similar-looking reels into one total. The resolution is to use actual markings and retain distinct records for count, pair, gauge, shielding, jacket, and length differences.
- Document reference and record date
- Matching line identified
- Unreadable designation or shield status remains unknown
Worked control and tray cable line
Illustrative only—not a purchased lot: CT-I-03 carries a TC-ER marking and is recorded as 12 conductors, 16 AWG, with shielding unknown. Its quantity is 240 ft measured continuous, and its condition is cable taken out of service with fitted ends present. The example keeps a known jacket marking separate from an unknown shield field.
Use a similar record when supplying photos: one reference, the copied designation, construction fields, length basis, condition, and any matching document. Include seller-controlled location and release information separately so it does not become a substitute for product identification.
- Mistake: tray location treated as a TC designation
- Resolution: markings and construction determine separate lines
- Illustrative record makes shielding uncertainty visible
