WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Sell Medium-Voltage Cable in Inglewood, California

Sell surplus medium-voltage cable with Industrial Wire Buyer. Industrial Wire Buyer buys surplus electrical wire and cable nationwide and can arrange trucking. If an Inglewood, California medium-voltage reel is described through an ITC scope, utility study, or purchase record, keep that document separate from the physical reel’s marking, quantity, condition, ownership, and release facts. A project record can provide context, but it cannot establish a reel’s identity or availability.

Medium-voltage reel records Inglewood, California

SELLER TASK / BEFORE YOUR QUOTE

Can each medium-voltage reel be identified from its own physical marking and matching record, with current quantity and independent seller-side release facts, rather than appearing only in a projected ITC procurement, utility-study, or system-package description?

THE PROBLEM TO RESOLVE

A seller may use an Inglewood Transit Connector scope, cost table, or utility-planning statement as if it identifies a presently held medium-voltage reel and proves it can be independently released, even though the physical marking, current quantity, matching record, ownership, and authority are unresolved.

MAKE THIS DECISION

Can each medium-voltage reel be identified from its own physical marking and matching record, with current quantity and independent seller-side release facts, rather than appearing only in a projected ITC procurement, utility-study, or system-package description?

Evidence to have ready

  • physical reel or package reference
  • full readable jacket or tag marking
  • manufacturer and part number when available
  • marked voltage and construction fields only when supported
  • matching record source or an explicit unknown
  • current continuous footage
  • measured, documented, estimated, or unknown quantity basis
  • overview, marking/tag, and visible-condition photo references
  • current storage location reference
  • condition and storage-exposure note
  • seller commercial authority
  • separate release contact or pending status
  • project or utility-study document title/date retained only as context

Avoid this record: A listing offers 1,860 feet of “1000 JCN medium-voltage cable from the ITC project” solely because a planning document contains that projected quantity, while no matching reel, current footage, owner, or release contact is shown.

Better record: Keep planning and procurement documents as dated context, then create a reel-level record from the physical item: readable designation, marked voltage, matching record, current footage and basis, photos, storage reference, seller commercial authority, and separate release status. Leave fields unknown or pending when the record does not support them.

Illustrative inventory example—not a purchased lot

Worked inventory record

reel reference
MV-ING-07
physical identification
“15 kV” marking photographed; manufacturer part number, insulation detail, and shield record unknown
quantity record
340 ft documented from a matching reel record; 1,120 lb gross loaded-reel weight
condition and storage
stored indoors; end-condition detail and prior service history unknown
authority
seller commercial contact recorded; release contact pending
project context
ITC planning document attached as context only; it does not establish reel identity or availability

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Keep an anticipated scope line separate from a physical reel

Table 1 in the ITC JPA’s DBE goal methodology identifies Medium-Voltage Cables and Low-Voltage Electrical Power Conductors And Cables as scope areas anticipated to be procured for the ITC Project. That is useful local context for why a seller may have an electrical-project reference, but it is not a reel list, a shipping record, an ownership record, or proof that any cable is available. Treat the table as a context note only; do not copy its category into a product description for a reel that cannot be physically identified.

Start an inventory line with the reel or package actually present. Transcribe the full visible jacket or tag marking, manufacturer and part number when readable, marked voltage, conductor information only when documented, reel reference, and current continuous footage. Keep the source for each field visible: physical tag, matching manufacturer document, seller inventory record, or unknown. A broad line such as “ITC medium-voltage cable” combines a project label with an unproven product identity and is less useful than an incomplete but accurate reel record.

  • Physical reel or package reference, kept separate from any project cost code or scope heading
  • Complete readable jacket/tag marking and manufacturer or part number when available
  • Marked voltage and construction details only from the reel or a matching record
  • Current continuous footage with measured, documented, estimated, or unknown basis

Do not turn a utility-planning description into a reel specification

The 2021 conceptual planning appendix says a 10 MVA scenario would need 1,860 feet of new 1000 JCN cable and 1,700 feet of upgrading/re-cabling existing SCE primary cable to 1000 JCN, and says those values were based on projected 2026 loads. The same source says the project would need future reevaluation as details were finalized. Those statements concern a planning scenario. They do not identify a seller’s cable, establish its present condition, show that a specified length was delivered, or identify who may release any material.

If a seller has a planning memo, drawing, estimate, or utility-study excerpt, retain it in a separate context field with the document date and source. On the physical reel line, use only the actual printed designation and records that clearly match that reel. Do not fill an unreadable voltage, conductor size, insulation, shield, neutral, batch, or footage field with a value from a corridor study or a similar-looking reel. State the field as unknown and attach a photo or record reference that shows what remains to be resolved.

  • Project document title, date, and purpose recorded as context rather than product identity
  • Actual reel marking and matching record source listed on the physical inventory line
  • Uncertain voltage, construction, or batch fields explicitly labeled unknown
  • Footage retained reel by reel instead of substituting a planned route or scope quantity

Separate a power-system reference from independent release authority

A project record can describe an electrical scope while the physical reel is allocated, reserved, returned, held for a contractor, or simply owned by someone else. Record the seller’s stated owner or commercial authority, the storage custodian, and the person who can authorize release as separate fields. Possession of a reel, access to a yard, or a name in a project document does not automatically answer all three questions. If authority is unresolved, keep the line in the inventory as pending rather than describing it as independently available.

The ITC Project record describes a 1.6-mile, three-station, fully elevated, electrically powered light-rail system that includes two traction power substations for providing power to the APM system. That identifies a system-level setting, not a seller’s cable. That system-level description is not proof that a separately stored cable reel is a standalone, releasable item. This page does not determine contractual rights, project allocation, or suitability for a system. It asks the seller to preserve the factual boundary: what reel is present, what record matches it, and who can speak to a lot-specific release.

  • Seller-stated owner or commercial authority, or an explicit unknown
  • Current storage custodian and precise location reference
  • Release contact or pending status, distinct from site access
  • Allocated, reserved, return-pending, uninstalled, or unknown disposition stated without assumption

Create a matched reel, quantity, and condition record

Give every reel a stable reference and use it in the inventory, photo filenames, and any matching records. Photograph the full reel or package, readable jacket printing or tag, accessible exterior end condition, and any visible storage exposure or damage. A photo of a nearby tag does not identify an unmarked reel. If several reels share a general description, keep them on separate lines when their markings, remaining footage, condition, source records, or authority facts differ.

Record continuous footage independently from weight, reel dimensions, or an old project total. Label footage as measured, documented, estimated, or unknown. Record any weight with its basis, such as gross loaded-reel weight, cable-only weight, or unknown; do not derive conductor quantity from it. Describe condition history factually as uninstalled, previously removed, weather-exposed, or unknown. These documentation fields support a buying review without making an electrical-performance statement or asking the seller to alter, test, cut, or move the cable.

  • Reel reference matched to overview, marking, tag, and visible-condition photos
  • Continuous footage and quantity basis on each individual reel line
  • Weight value and exact basis kept separate from footage and conductor identity
  • Condition and storage exposure noted factually, with unknown history left unknown

Correct the plan-only medium-voltage listing

A specific mistake is to advertise “1,860 feet of 1000 JCN medium-voltage cable available from the ITC project” because a planning document contains that quantity. The document may describe a projected upgrade, while the seller has not identified a physical reel, current footage, matching marking, owner, or release contact. The correction is to remove the plan quantity from the offer line, create a reel-level record from the material actually present, and retain the study only as dated local context. If the reel’s designation cannot be read, the designation remains unknown rather than being inferred from the plan.

Illustrative inventory example—not a purchased lot: MV-ING-07 is one stored reel with a photographed “15 kV” marking; the manufacturer part number, insulation detail, and shield record are unknown. Its current amount is 340 ft documented from a matching reel record, and its gross loaded-reel weight is 1,120 lb; cable-only and conductor weights are unknown. The seller records an indoor storage bay and a named commercial contact, while the release contact is pending. An ITC planning document is attached as context only and does not fill any unknown reel field or establish availability.

For an inquiry, send the supported reel line, photos, known condition and location facts, and the named or pending authority fields. Industrial Wire Buyer can arrange trucking for a lot, but an inquiry does not establish release, transport, price, payment, acceptance, or a timetable. Keeping the record limited to supported facts lets any lot-specific discussion begin without representing a projected scope as material already cleared for sale.

  • Illustrative inventory record—not a purchased lot: MV-ING-07
  • Marking: “15 kV” photographed; manufacturer part number, insulation detail, and shield record unknown
  • Quantity: 340 ft documented from a matching reel record; 1,120 lb gross loaded-reel weight
  • Custody and release: indoor storage-bay reference and seller commercial contact recorded; release contact pending
  • Context: ITC planning document retained separately and not used as proof of reel identity or availability

Before the first call

Your questions,
answered.

Can an ITC procurement table or cost category identify my medium-voltage cable reel?

No. The ITC table describes anticipated scope areas and values, not a seller’s physical inventory. Use it only as local project context. Identify the reel from its own readable marking, tag, matching record, current footage, photos, and seller-side authority information. If those fields are missing, mark them unknown rather than assigning the project category to the reel.

May I use the planned 1000 JCN footage from the utility study as my reel quantity?

No. The planning appendix describes projected upgrades for a scenario and says the work would need reevaluation as details were finalized. List the actual reel’s current continuous footage and label its basis measured, documented, estimated, or unknown. A route or planning quantity is not a current physical-reel balance.

What if I have a medium-voltage reel but the release contact is still pending?

Keep the reel on a separate inventory line with the physical facts you can support: marking, photos, current quantity basis, condition note, and storage reference. Identify the commercial contact you know, label the release contact pending, and avoid calling the reel independently available until seller-side authority is clarified.

How should an unreadable medium-voltage tag be handled in a quote inquiry?

Photograph the readable portion and record the missing designation, voltage, construction, or batch field as unknown. Add a matching manufacturer or inventory record only if it clearly names that same reel. Do not use a project plan, a neighboring reel, or a general system description to complete the tag.

Sources

Further reading

  1. Inglewood Transit Connector JPA — FTA Overall DBE Goal Setting Methodology
  2. California CEQAnet — ITC Appendix E: Operating System Conceptual Plans
  3. California CEQAnet — Inglewood Transit Connector Project Record
Call now