Start with the printed designation
Copy the full jacket legend and reel tag for each distinct line. Preserve Type TC, TC-ER, PLTC, or other wording exactly when it appears, together with the manufacturer and part number. A location in a cable tray, control room, or project area can describe origin, but it cannot replace the product designation.
Link a photo or matching data sheet to the reel reference. If the readable marking stops before the construction is clear, mark the missing part unknown. Do not broaden a short label into a more specific cable type without an item-level record.
- Printed designation.
- Manufacturer and part number.
- Reel reference and photo reference.
- Data-sheet ID only when it matches the item.
Split conductor, pair, and shield differences
Record conductor count, pair count where applicable, gauge, and shielding for the actual reel. Similar jackets can conceal different count or shield arrangements, so each difference needs its own line. This page focuses on specification separation, not simply whether the inventory is large.
When shielding is not confirmed, state that it is unknown. Keep product lines distinct even if their reels sit together or have the same former project location. The result is a record that allows a buyer to see which fields are evidence-backed.
- Conductor count.
- Pair count when applicable.
- Gauge and shielding.
- Separate line for each marked construction.
Document continuous length and history
List the remaining continuous footage for every reel or piece, and mark it measured, documented, or estimated. Note fitted ends and visible jacket condition as observations. Keep uninstalled stock, overage, and previously used cable in separate history groups even when their jacket legends match.
A common mistake is calling every cable from a tray Type TC and combining it into one footage figure. Correct it by relying on actual markings, splitting conductor/pair/shield differences, and retaining the per-reel length that belongs to each construction.
- Footage and quantity basis.
- Fitted-end description.
- Visible jacket condition.
- Condition/history and storage location.
Use the local fact within its limits
Solano EDC reports more than 1,000 acres of industrial vacant land available for future business expansion and identifies biotechnology, food processing, logistics and manufacturing among Vacaville’s business mix. It is a broad context for a local industrial inventory inquiry, not evidence that a particular control or tray cable lot exists or that a named business is involved.
Seller records remain the source for the cable designation, count, shielding, quantity, condition, release authority, and access facts. Keep those fields with the reel so local context never becomes a substitute for product evidence.
- Local business context does not identify a cable lot.
- Use actual markings for specification.
- Keep release and access facts seller-provided.
Worked control-cable record and unknowns
Illustrative fictional inventory record — not an actual or purchased lot: CT-VV-01 has a photographed TC-ER marking, 12 conductors at 16 AWG, shielding unknown, and 240 ft measured. It is listed as previously used cable with fitted ends. The record does not claim that every nearby reel has the same construction.
If the pair count or shield status cannot be documented, retain the reel reference, visible legend, and estimated or measured footage, then flag the unresolved field. That is better than merging uncertain reels into a single specification or asserting a designation based on storage location.
- Example reference: CT-VV-01.
- Designation: TC-ER marking photographed.
- Construction: 12 conductors, 16 AWG; shielding unknown.
- Quantity: 240 ft measured; fitted ends noted.
