Transcribe the designation instead of guessing from location
Start each line with the exact readable jacket designation, manufacturer, part number, and marked voltage. Record TC, TC-ER, PLTC, or any other marking as it appears; do not assign a type because cable was stored in a tray or associated with a particular project. When printing is incomplete, preserve the visible characters and mark the rest unreadable.
The city says its Marine and Aviation Department is responsible for waterway management within municipal boundaries, including permitting and maintenance of more than 200 navigational and regulatory markers. That is local infrastructure context only and does not identify installed cable or material for sale. It is why a seller should describe the actual item instead of using a nearby waterway or facility as a substitute for its printed designation.
- Photograph the jacket legend and reel tag, then record printed designation, manufacturer, part number, and voltage.
- Use designation unreadable for a line whose jacket cannot support a complete classification.
Split conductor and shield variants before totaling footage
Open a separate line for each conductor count, pair count, gauge, and shielding arrangement. Two reels can share an outside-jacket color and still be different assemblies. Keeping those details distinct avoids turning a mixed group into a single Type TC or control-cable total that cannot be traced back to individual pieces.
If shielding cannot be confirmed from the legend, a matching record, or accessible evidence, state shielding unknown. Do not put that line with documented shielded or unshielded inventory. The unknown is a useful review field, not a reason to guess.
- Keep conductor count, pair count, gauge, and shielding in separate columns.
- Group only lines with identical documented designation and construction fields.
Retain individual continuous lengths and end condition
Give every reel or cut length an inventory reference and record continuous footage with its basis: measured, documented, estimated, or unknown. Include fitted ends where present. A group total can be useful as a summary, but it must not replace the length and reference for each physical item.
The frequent mistake is labeling everything taken from a tray or found near a water system as Type TC and combining it into one total. Correct it by keeping construction variants and unidentified lines separate, then matching each one to its own photographs and evidence.
- Record inventory reference, continuous footage, quantity basis, and fitted ends per item.
- Keep estimated lengths distinct from measured or documented lengths.
Make the photo record carry the unknowns
For each line, attach label, jacket-printing, overview, and condition photographs under the same reference. Add any matching data sheet and a brief service-history note only where it is known. The record should show jacket condition and unknown fields directly, rather than silently filling gaps with a nearby reel’s label.
A fictional model entry is CT-CW-04: TC-ER marking photographed; 12 conductors, 16 AWG; shielding unknown; 240 ft measured; previously removed cable with fitted ends. It is not a purchased lot. If a designation cannot be read, keep the item separate with its photos until stronger evidence is available.
- Match photo references and data sheets to the individual inventory reference.
- Record jacket condition and service history when known; use unknown when the record does not support them.
