Read the jacket before naming the cable
Photograph and transcribe the exact visible designation, such as TC, TC-ER, PLTC, or another printed string, together with manufacturer, part number, and marked voltage. Cable found in a tray is not automatically Type TC; installation location cannot substitute for the product’s own designation.
Make a separate line for any reel with incomplete or unreadable markings. Keep partial text, tag images, and photo references with that line, but do not use a neighboring reel’s designation to complete it. This is especially important where several visually similar control assemblies were stored together.
- Exact jacket designation.
- Manufacturer, part number, and marked voltage.
- Photo of the designation and reel label.
- Unknown designation retained as its own line.
Split conductor, pair, and shield variants
Use distinct fields for conductor count, pair count, gauge, overall shield, individual-pair shield, jacket, and any known drain-wire or armor detail. Do not reduce different arrangements to a single phrase such as “multi-conductor control cable.” The detail is what differentiates physically similar reels for a buying review.
The likely mistake is classifying every cable found in or removed from a tray as the same Type TC product. Correct it by relying on the exact jacket marking and by separating count and shielding variants even where the reels share a storage location or project record.
- Conductor count and pair count.
- Gauge for each variant.
- Overall shield, individual shield, both, none, or unknown.
- Jacket designation and any readable construction notes.
Preserve per-reel quantity and end condition
Record the continuous footage and quantity basis for every reel: measured, documented, or estimated. If an item has fitted ends, cut ends, or a splice, record that existing condition along with the reel ID. Do not turn several short pieces into one continuous length because their jacket text is similar.
Match a data sheet, purchase record, or maintenance file only to the reel it actually identifies. Where the document-to-reel match is unclear, describe the document as unmatched and leave the dependent construction field unknown. Accurate uncertainty is more useful than a plausible but unsupported cable type.
- Reel ID and continuous footage.
- Measured, documented, or estimated basis.
- Fitted-end or cut-end status.
- Document-to-reel match or explicit unmatched status.
Record use history without replacing product evidence
State whether the cable is uninstalled stock, previously used, or unknown, then describe visible jacket condition and any known storage history. This distinguishes condition context from technical identity. It does not establish electrical suitability, and it should not cause a seller to alter the material before the lot is discussed.
The city’s Environmental Services / Engineering department supports roadways, capital improvement projects, stormwater and drainage, wastewater, development projects, water-plant, utilities maintenance, street maintenance and construction/facilities functions. The statement is useful only as a local context for facilities or maintenance records; it neither proves that a particular control-cable reel exists nor changes the need for the printed designation and per-reel evidence.
- Unused, previously used, or unknown status.
- Visible jacket condition and known storage history.
- Exact local fact held separate from the seller’s inventory proof.
Illustrative control-cable entry
Illustrative record only; not a purchased lot: DB-CT-01 — TC-ER marking, 12 conductors, 16 AWG, shielding unknown; 240 ft continuous, measured; previously used cable with fitted ends. The fictional entry makes its unverified shield explicit instead of borrowing a specification from another reel.
If the printed string is incomplete, describe the gap as unknown, retain close photos, and state whether a matching product record can be located. The workable next step is to keep the unknown reel distinct until its construction can be tied to evidence.
- Example label: Illustrative record only; not a purchased lot.
- Use separate lines for different shield layouts.
- Never infer Type TC from tray location.
