Separate identity from weight
Create one line for each physical reel, coil, or cut length. Transcribe the manufacturer or part number, visible jacket legend, AWG or kcmil, and insulation or jacket designation when present. Keep bare conductors, insulated building wire, and multi-conductor assemblies on separate lines because the same scale number can mean different things.
Then identify the quantity basis. Footage may be measured, documented, estimated, or unknown. A scale figure may be gross loaded-reel, cable-only, conductor-only, net, or unknown. Do not make a conversion from one basis to another unless the supporting record actually supplies it.
- One physical reel, coil, or cut length per record.
- Record markings before characterizing a weight.
- Label footage and weight with their separate bases.
Report a loaded reel accurately
If the only figure is from a scale with the reel and packaging present, write gross loaded-reel weight and identify what was included. That figure may include wood, steel, insulation, jacket material, and packaging. Keep conductor weight unknown rather than treating a gross figure as copper content.
If a ticket or dated record supports cable-only or conductor-only weight, attach the reference to the same reel ID and say whether the reel and packaging were excluded. A buyer can read the record more reliably when its source and scope are explicit.
- Weight value and weight basis.
- Whether the reel or packaging is included.
- Scale ticket, dated record, or other source reference.
Keep footage useful
A full reel, a partial reel, and several short pieces are not interchangeable quantities. Record the remaining continuous footage for every reel and state how the figure was obtained. If footage is an estimate, say why it is estimated; if it cannot be determined, preserve that unknown instead of presenting a false total.
Photograph the reel tag, the jacket printing, the whole reel, and any visible end condition. Use the reel ID in each photo name. This lets a reviewer see whether the cited weight record and visible material concern the same item.
- Continuous footage per reel.
- Measured, documented, estimated, or unknown footage.
- Photo references matched to each reel ID.
Add release and access facts without assumptions
Record the storage location, visible damage or exposure, the role that can authorize release, and available loading information. These facts make the inventory record practical while avoiding assumptions about pickup, freight, or timing. A loose statement that a reel is in a warehouse is less useful than the reel’s actual location and access constraints.
FDOT identifies Deltona as a major city in District Five and lists Volusia among the district’s counties. That limited local fact supports asking for real storage and access details; it does not imply a local facility, a transport commitment, or a known cable lot.
- Storage and loading notes.
- Release authority for the specific inventory.
- Visible damage or exposure recorded as observed, not inferred.
Illustrative copper record and correction
Illustrative inventory example—not a purchased lot: CU-DL-004 is a fictional insulated-copper reel. Its record says 900 lb gross loaded reel, conductor weight unknown, and continuous footage not yet documented. The fictional manufacturer marking identifies the line only for this example.
The mistake would be to write 900 lb of copper. The corrected record retains gross loaded-reel weight, does not invent conductor content, and creates a separate footage field. This format keeps an incomplete record reviewable without claiming more precision than the evidence supports.
- Fictional reel: CU-DL-004.
- 900 lb gross loaded reel; conductor weight unknown.
- Continuous footage: not yet documented.
