WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Building Wire Buyers in Miramar, Florida

Industrial Wire Buyer: we buy marked building-wire reels in Miramar, Florida when each line states the conductor metal, gauge, insulation marking, current continuous footage, and weight basis. Separate reels by what is printed on them, not by color or an original reel total, so the material review begins with a usable inventory record.

Building-wire reels Miramar, Florida

SELLER TASK / BEFORE YOUR QUOTE

Does each building-wire line show the marked product and the amount remaining today?

THE PROBLEM TO RESOLVE

Mixed copper or aluminum building-wire reels are often summarized by color or original footage, hiding exact designation, metal, size and current continuous length.

MAKE THIS DECISION

Does each building-wire line show the marked product and the amount remaining today?

Evidence to have ready

  • manufacturer
  • part number
  • THHN/THWN-2/XHHW-2 or actual marking
  • voltage
  • conductor metal
  • AWG/kcmil
  • insulation
  • color
  • reel ID
  • continuous footage
  • quantity basis
  • condition
  • weight basis
  • reel/packaging included
  • storage exposure
  • damage

Avoid this record: Five different gauges are combined as one total of copper wire and the original reel footage is presented as remaining stock.

Better record: Split by marked designation and metal, preserve each reel's length, and label the current balance and weight basis explicitly.

Illustrative only—not a purchased Miramar lot

Worked inventory record

reference
BW-M01
product
THHN/THWN-2, 12 AWG copper, black
quantity
650 ft continuous, estimated
condition
partial, uninstalled reel

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Why exact markings matter

Reel color or an aggregate footage number hides crucial distinctions between lines. A single listing that mixes multiple AWG sizes, copper and aluminum conductors, or different insulation types prevents a clear review and forces follow-up questions. Use the reel tag and jacket printing to show the actual product designation rather than relying on visual cues.

Preserve and photograph the complete reel tag and any readable jacket printing. The required evidence fields include manufacturer, part number, THHN/THWN-2/XHHW-2 or actual marking, and voltage. These identifiers let a reviewer determine the product family, insulation rating and suitability for separate listing.

Miramar’s official business page describes modern facilities, business parks and mixed-use developments, and identifies aviation, IT, logistics and financial services among its industries. It supplies limited city context for a seller organizing facility, contractor, or distributor stock; it does not show that any listed organization owns wire or is a buyer.

  • Capture full reel tag and legible jacket print
  • Record manufacturer and part number exactly as printed
  • Note any insulation designations such as THHN/THWN-2/XHHW-2 or the exact marking shown

Separate product lines by metal, gauge and insulation

Do not group different metals or gauges together. Separate copper from aluminum lines, and list AWG or kcmil for each product. Distinguish insulation type and jacket color as secondary identifiers that support the printed marking.

Provide discrete entries for each marked designation. For example, one reel marked THHN/THWN-2 12 AWG copper black is a separate line from a reel marked THHN 10 AWG copper red. If multiple reels share a marking, include a reel ID and continuous footage for each reel so totals do not mask individual reel balances.

  • List conductor metal (copper or aluminum) per reel
  • Record AWG or kcmil for each reel separately
  • Include insulation type and color to support the marking

Report current length and quantity basis clearly

Record the continuous footage per reel and indicate whether the value is measured, documented, or estimated. Distinguish between full reels, partial reels and cut lengths. A single original reel footage number should not be presented as the remaining stock without showing the present continuous footage.

For every reel include a reel ID, continuous footage, quantity basis (measured/documented/estimated), and condition (full, partial, cut). This prevents the common mistake where five different gauges are combined as one total and original footage is assumed to remain.

  • Provide reel ID for each reel or pack
  • Show continuous footage and how it was determined (measured, documented, or estimated)
  • Label each reel as full, partial, or cut length

Weight reporting and visible condition

When reporting weight, label the basis explicitly: gross loaded-reel, cable-only net, or unknown. Note whether the reel and packaging are included in the weight figure. Document visible storage exposure and any damage that could affect condition or remaining continuous footage.

If weight is unknown, state that clearly and supply the reel dimensions and photos. Honest weight basis avoids assumptions and supports split-by-designation resolution when different gauge reels were aggregated incorrectly.

  • State weight basis: gross loaded-reel, cable-only net, or unknown
  • Indicate if reel/packaging is included in the weight
  • Note visible storage exposure (outdoor/covered/indoor) and any damage

What to do with unknown or incomplete inventory

If marking is missing, do not guess the designation. Record the observable jacket text, take clear photos, and mark the item as 'marking unreadable' with the visible characteristics: color, approximate diameter, and any remaining tag fragments. Provide continuous footage estimates and label the quantity basis as estimated.

When reels are bundled or several gauges were previously combined into a single entry, split the lines by any distinct remaining marking or physical differences. If you cannot separate mixed reels physically, list them as mixed with a precise description of which markings are present on which pieces and provide per-piece or per-reel footage where possible.

  • If marking is unreadable, photograph jacket and any tag fragments and mark the basis as estimated
  • Separate mixed bundles into per-reel or per-piece entries whenever possible
  • Label unknowns explicitly and provide best-available footage estimates

Illustrative record and how to present yours

Use a clear per-line record using the illustrative example below. Each entry should include a reference ID, product designation (as marked), continuous footage with basis stated, and condition. An illustrative record demonstrates the format: Reference BW-M01 — THHN/THWN-2, 12 AWG copper, black — 650 ft continuous, estimated — partial, uninstalled reel.

Avoid combining different gauges into a single total. If you inherited listings that sum multiple gauges, revisit each reel, photograph markings, and split them into separate records with preserved lengths and a stated weight basis. That resolves the common inventory mistake.

  • Follow the illustrative record structure: reference, product, quantity, condition
  • Do not present original reel footage as remaining stock without current footage verification
  • Preserve each reel's length and explicitly state weight basis

Before the first call

Your questions,
answered.

Can partial building-wire reels be submitted?

Yes. Submit partial reels as separate line items and include reel ID, continuous footage, and the quantity basis (measured, documented, or estimated). State the condition as partial, uninstalled reel, cut length, or full reel. If footage is estimated, include photos of the reel and tag so the estimate can be verified; do not aggregate partial reels of different AWG or metal into a single total.

Is wire color enough to identify the product?

No. Color alone is not sufficient. Capture and record the complete reel tag and readable jacket printing and provide the required evidence fields: manufacturer, part number, THHN/THWN-2/XHHW-2 or actual marking, and voltage. Also list conductor metal and AWG/kcmil. If the jacket shows no marking, photograph any tag fragments and mark the entry as 'marking unreadable' while providing all observable characteristics.

How should gross reel weight be reported?

Label weight with an explicit basis: gross loaded-reel, cable-only net, or unknown. If you report gross loaded-reel, note that the reel and packaging are included; if cable-only, state that packaging is excluded. When weight is unknown, include reel dimensions, photos, and an honest statement that weight is unknown. Record storage exposure and any visible damage that might affect weight or remaining continuous footage.

What do I do if five different gauges were combined as one total?

Split the listing by marked designation and metal. Re-inspect each reel or bundle, photograph markings, assign a reel ID, and record continuous footage per reel with the quantity basis (measured, documented, or estimated). Preserve each reel's length and explicitly state the weight basis. If separation is impossible on-site, list the mixed bundle with detailed notes on which markings are present and per-piece footage where available; do not leave an aggregate single-gauge total.

Sources

Further reading

  1. City of Miramar — Business
Call now