Capture the printed designation before grouping cable
Photograph the readable jacket legend, manufacturer, part number, and any marked voltage before sorting a control or tray lot. Transcribe the full designation as shown, whether it includes TC, TC-ER, PLTC, or another product marking. Where the printing cannot be read, mark the line unconfirmed rather than naming the cable from where it was stored or installed.
A tray location is not a product specification. One area can contain multiple constructions, and a cable removed from a tray does not automatically share the designation of the cable beside it. The printed record is the starting point for a material buying inquiry.
- Complete jacket designation and readable manufacturer information.
- Part number and marked voltage where visible.
- Photo file name tied to a reel or cut-piece reference.
- Unconfirmed status for unreadable or missing printing.
Split conductor, pair, shield, and jacket variants
Use a separate inventory line for each change in conductor count, pair count, size, shielding arrangement, or jacket detail. State overall shield, individual pair shield, drain wire, or no confirmed shielding only when the marking or a matching record supports it. A visually similar reel with a different count or shield is a different seller record.
Keep an unknown field beside the available facts. Do not unspool, cut, or alter a cable to force a count; disclose the limit and photograph what can be seen safely. The buyer can then distinguish a known product variant from a line that needs additional documentation.
- Conductor count and pair count as separate fields.
- Conductor size and stated shielding arrangement.
- Jacket or designation differences on separate lines.
- Explicit unknown field instead of an inferred construction.
Preserve continuous length and existing ends
For every reel or cut piece, list the remaining continuous footage and whether the figure is measured, documented, estimated, or unknown. Note accessible fitted ends, terminations, exposed conductors, or visible jacket damage without changing the cable. Keep removed cable distinct from uninstalled stock so the condition history is not blurred.
Match any existing data sheet or record to the same reel reference, not merely to a similar product description. If a file cannot be matched, retain it as unmatched information and do not use it to identify a different reel.
- Continuous length and quantity basis.
- Fitted-end or termination description.
- Visible jacket condition and stated service history.
- Reel reference matched to any existing document.
Treat project context as background, not a designation
The City’s infrastructure-projects page lists work across stormwater, potable water, wastewater and transportation infrastructure. That local context may explain why a seller is organizing project-related cable, but it does not establish the product designation, condition, or availability of any reel. The reel’s own printing and the seller’s line-item record remain the evidence for this specific task.
This page is about avoiding a product-separation error: grouping every multi-conductor cable from one tray or project under one label. It is not an installation guide or a general project summary. Keep each construction variant, length, and condition record visible for a lot-specific review.
- Project name may be recorded as background only.
- Use the actual cable legend to classify the inventory line.
- Keep unlike reels separate even when stored together.
Use a fictional line that retains the uncertainty
Illustrative fictional inventory record—not a purchased lot: reel CT-SP-03; TC-ER marking photographed; 12 conductors, 16 AWG; shielding unknown; 240 ft continuous, measured; removed cable with fitted ends present. The record does not turn an unknown shield into a confirmed feature or treat the entire project as one cable type.
The common mistake is calling all cable from a tray Type TC and reporting one pooled footage total. Correct it by using actual printed designations, separating conductor or pair and shield variants, and retaining one continuous length record for every reel or cut piece.
- Fictional record fields: reference, designation, construction, quantity basis, and condition.
- A single tray or project is never a substitute for the reel-level record.
