WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Control & Tray Cable Buyers in Boise City, Idaho

We buy control and tray cable from Boise City, Idaho sellers when the record separates look-alike multi-conductor reels by their actual markings. List the jacket designation, conductor or pair count, gauge, shielding, voltage marking, continuous length, and service history for each line rather than classifying cable solely by where it was found.

Control and tray specifications Boise City, Idaho

SELLER TASK / BEFORE YOUR QUOTE

Do the inventory lines preserve the actual jacket designation and every construction variant for each continuous piece?

THE PROBLEM TO RESOLVE

Similar-looking multi-conductor reels are grouped despite different conductor counts, gauges, shielding, and jacket designations.

MAKE THIS DECISION

Do the inventory lines preserve the actual jacket designation and every construction variant for each continuous piece?

Evidence to have ready

  • jacket designation
  • manufacturer
  • part number
  • conductor or pair count
  • gauge
  • shielding
  • marked voltage
  • reel ID
  • continuous length
  • quantity basis
  • history
  • release authority

Avoid this record: Cable found in a tray or control area is combined into one Type TC footage total without confirming the product markings.

Better record: Use one line per verified construction and continuous piece, retain photo references, and state missing construction fields as unknown.

Illustrative fictional inventory example—not a purchased lot

Worked inventory record

reelReference
CT-B04
designation
TC-ER marking; 12 conductors; 16 AWG; shielding unknown
continuousLength
240 ft measured continuous
history
previously in service; fitted ends present
releaseRecord
release authority documented

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Read the cable before calling it control or tray cable

A cable found in a tray is not automatically Type TC, and a similar jacket does not establish matching conductor count or shielding. Start with the readable jacket legend, reel label, manufacturer, and part number. Transcribe the complete designation that can be seen; do not fill a missing field from a neighboring reel or from the cable’s location.

The City of Boise identifies manufacturing, wholesale trade, professional/scientific/technical services and waste management/remediation among its top employment sectors by employment (2018), and lists Micron Technology, HP, Idaho Power and J.R. Simplot among major employers. This is only city context for possible facility inventory. It does not identify an employer’s material, prove availability, or replace the markings on the offered cable.

  • Photograph the full readable jacket legend and the reel label.
  • Record manufacturer and part number exactly when they are present.
  • Use “unknown” for a missing designation rather than assigning Type TC.

Split small construction changes into separate lines

The core seller task is variant separation. Put conductor count or pair count, gauge, shielding, jacket designation, and marked voltage in their own fields. Two reels that differ on any of those fields should not inherit one another’s record, even if they share a storage shelf or similar color.

A common mistake is listing all cable from a control area as one Type TC total. The workable resolution is a row for each verified construction and continuous piece. A line with unknown shielding remains useful when that uncertainty is explicit and the photo reference stays connected to that line.

  • Keep conductor count or pair count separate from gauge.
  • Describe shielding from the marking or matching record, or mark it unknown.
  • Record jacket designation and marked voltage on the same line as the reel ID.

Keep partial reels and service history legible

Record the continuous length on each reel or cut piece and state whether the amount is measured, documented, or estimated. A partial reel is not interchangeable with a full reel, and several cut pieces should not be reported as one long continuous length. Note fitted ends and visible jacket damage as observations, not as a technical condition conclusion.

Separate uninstalled stock, project overrun, and cable previously in service. That distinction preserves the history needed for a purchasing conversation without suggesting a classification, approval, or outcome for the material.

  • Give every reel or piece a line ID and a photo reference.
  • State measured, documented, or estimated beside each continuous length.
  • Record fitted ends, visible damage, and known history on the applicable row.

Make unknown fields useful evidence

If printing is worn or a label is missing, retain the item as an individual line. State exactly what cannot be read, why the field is unknown, and which photographs or site records were checked. Do not merge the unknown reel into an identified inventory total merely to make the list shorter.

Where a manufacturer record is available, connect it to the actual part number and reel reference. If that connection cannot be made, leave the record as background rather than presenting it as product evidence for the offered cable.

  • Keep unreadable-marking reels separate from identified reels.
  • Describe the evidence checked and the field that remains unknown.
  • Do not use a similar product sheet to complete a missing construction field.

Build a fictional line before preparing the file

Illustrative fictional record—not a purchased lot: CT-B04 has a visible TC-ER marking, 12 conductors, 16 AWG, shielding unknown, and 240 ft measured continuous. The line also says “previously in service; fitted ends present,” links to its photos, and lists the release authority as documented. It is an example of a complete record, not evidence about a real Boise lot.

Before sending an inventory, compare each actual line to that structure. The goal is not to force every field to be known; it is to preserve a specific uncertainty with the correct reel so the next discussion concerns an identifiable item.

  • Example designation: TC-ER marking; 12 conductors; 16 AWG; shielding unknown.
  • Example quantity: 240 ft measured continuous.
  • Example history: previously in service; fitted ends present.

Before the first call

Your questions,
answered.

Is cable found in a tray automatically Type TC?

No. Use the readable jacket designation, reel label, and matching manufacturer record rather than the storage or prior-use location. If the designation cannot be read, list it as unknown on a separate line with photo references.

Which fields distinguish similar control-cable reels?

Keep conductor or pair count, gauge, shielding, jacket designation, and marked voltage as separate fields. A difference in any one of them is a reason to keep the reel or continuous piece on a separate inventory line.

How should I list a partial control-cable reel?

Use its own reel ID, record the remaining continuous length, and label that quantity measured, documented, or estimated. Note fitted ends or visible jacket damage and keep the reel distinct from other pieces even when the designation appears similar.

What belongs in a record when shielding is unknown?

State shielding as unknown, retain the other visible markings, attach the relevant photo references, and explain whether the label or jacket was unreadable. Do not use another reel’s shielding description to complete the field.

Sources

Further reading

  1. City of Boise: Boise, by the numbers
Call now