Transcribe the wire instead of describing a color
For each reel or coil, record manufacturer, part number when present, exact printed designation, marked voltage, conductor metal, size in AWG or kcmil, and color. Designations such as THHN, THWN-2, or XHHW-2 should be copied from the material or matching record, not inferred from storage location or appearance. A color can help distinguish lines in a photo set, but it does not establish size, insulation, or a full product specification.
Take a readable photo of the tag and a separate photo of the jacket printing, then assign both files to the same reference. If the printing is incomplete or a label is missing, record what can be seen and leave the rest unconfirmed. This preserves the difference between documented building wire and a line that still needs identification.
- Manufacturer and part number when available
- Exact printed designation and marked voltage
- Conductor metal, AWG or kcmil, and color
- Tag and jacket-photo references under one line ID
Report current continuous footage
Use one inventory line for each gauge, designation, and reel or coil. State whether it is a full reel, partial reel, boxed quantity, coil, or cut length, and then report the remaining continuous footage. An original tag may be useful background, but it is not automatically the current balance. Label every figure measured, documented, or estimated so a buyer can see what supports the quantity.
Do not combine several gauges under one total described only as copper or aluminum wire. Keep unknown product markings separate as well. The difference between a 650-foot estimated partial reel and several short pieces is meaningful for an inventory review, even where their aggregate footage is similar.
- Reel or coil reference
- Material form and current continuous footage
- Measured, documented, or estimated quantity basis
- Separate line for every gauge and designation
Distinguish condition from weight
Condition fields should distinguish unused stock, partly used material, cable previously in service, and recovery-only pieces without turning a visual observation into a performance claim. Note visible storage exposure, damaged insulation, missing labels, or fitted ends when known. The inventory should say what is known, not declare a product suitable for a future use.
Weight needs a separate basis. If a seller has a number, identify it as gross loaded-reel, cable-only, net, or unknown. A reel, packaging, insulation, and other components can be included in a gross figure, so it should not be represented as conductor weight. If no reliable weight exists, leave the weight field unknown rather than creating an estimate from a photograph.
- Condition category and visible issue notes
- Storage exposure or damage field when known
- Gross, net, cable-only, or unknown weight basis
- Separate unknown-marking line where needed
Keep local context proportionate
St. George Public Works lists pothole and street issues, signage, signals and striping, drainage ditch or culvert cleanouts, sinkhole repairs, debris piles and right-of-way tree work among its examples of responsibility. That statement can be local background for a contractor or maintenance record, but it does not identify a wire reel, prove ownership, or establish demand for a product.
Name the actual seller, owner, and release authority for every proposed group of wire. Add the storage location, access information, and the evidence reference that connects the line to its photos or records. This is a practical way to keep local context separate from the product and quantity information the buyer needs.
- Owner and release-authority contact
- Storage location and access note
- Photo and record reference matched to wire line
- Explicit unknown field where evidence is absent
