WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Control & Tray Cable Buyers in Sterling Heights, Michigan

We buy control and tray cable in Sterling Heights, Michigan. List each distinct assembly by its actual jacket designation, conductor or pair count, gauge, shielding, continuous footage and end condition. A shared tray location is not a product specification, so keep unreadable markings and unknown shielding visible rather than assigning a category by where the cable was found.

Control and tray specifications Sterling Heights, Michigan

SELLER TASK / BEFORE YOUR QUOTE

Are the TC or other product markings, conductor/pair counts and shielding differences preserved on separate inventory lines?

THE PROBLEM TO RESOLVE

Plant reels with different conductor or pair counts, shields and jacket designations are easily combined because they look alike or came from the same tray.

MAKE THIS DECISION

Are the TC or other product markings, conductor/pair counts and shielding differences preserved on separate inventory lines?

Evidence to have ready

  • jacket designation
  • manufacturer
  • part number
  • marked voltage
  • conductor/pair count
  • gauge
  • shielding
  • jacket
  • reel ID
  • continuous footage
  • quantity basis
  • fitted ends/condition
  • photo reference
  • data-sheet match
  • service history
  • storage location

Avoid this record: All cable removed from a tray is classified as Type TC.

Better record: Use the actual markings and matching records; keep designation unknown where evidence is missing and separately disclose removed status.

Illustrative record — not a purchased lot

Worked inventory record

line
CT-SH-11
product
TC-ER marking, 12 conductors, 16 AWG; shielding unknown
length
240 ft continuous, measured
condition
removed cable; fitted ends present

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Why line-by-line specification matters

Control and tray cable families include many similar-looking constructions. Plant reels that came from a single tray or bundle are often different in conductor count, pair count, shielding and jacket print. Treating every removed cable from a tray as a single Type TC classification causes mismatches between what is listed and what is actually on the drum or cut lengths.

Listing each physical assembly as its own inventory line preserves product markings and avoids mixing constructions. That makes the records usable for inspection, transport planning and any disposition authority that must confirm labeling and continuity.

The city’s automotive and advanced manufacturing page names four OEM vehicle production plants: the Sterling Heights Assembly Plant, Sterling Heights Stamping Plant, Ford Van Dyke Transmission Plant and Ford Axle Plant. This is context for plant-style control-cable records only; it does not identify inventory at any named facility.

  • Capture the exact printed designation (for example TC, TC-ER, PLTC) rather than a generic category.
  • Separate lines for any change in conductor/pair count, gauge, shielding or jacket legend.
  • Disclose removed status and any fitted ends or jacket damage instead of assuming in-tray condition.

Step 1 — Copy the actual designation

Transcribe the exact jacket printing: TC, TC-ER, PLTC or any other visible designation. If the text is unreadable, mark the designation as unknown rather than guessing.

Record the manufacturer, part number and any marked voltage on the same inventory line. These fields are necessary to confirm whether two visually similar assemblies are the same product.

  • Evidence fields to include: jacket designation; manufacturer; part number; marked voltage.
  • If a label is partially rubbed, photograph the area and flag it as unreadable in the designation field.

Step 2 — Split similar assemblies

When conductor count, pair count, gauge, shielding or jacket arrangement differ, create separate lines. Do not aggregate reels that differ by any of these characteristics even if they share the same tray origin.

This split clarifies what is available versus assumed and prevents the common error of classifying all removed tray cable as Type TC.

  • Evidence fields to include: conductor/pair count; gauge; shielding; jacket.
  • If shielding is unknown, record 'shielding unknown' and include photos or data-sheet matches when available.

Step 3 — Record length and ends

List each reel or cut length individually. State whether footage is measured or estimated and whether lengths are continuous. Also disclose any fitted ends, terminations or jacket damage on the same line.

If quantity is provided as multiple reels of the same line, include distinct reel IDs or a quantity basis that links back to photographed reel labels.

  • Evidence fields to include: reel ID; continuous footage; quantity basis; fitted ends/condition.
  • For removed cable, explicitly disclose 'removed' status on the condition field rather than implying tray-installed condition.

Step 4 — Link documents and photos to each line

Attach or reference label photos, printing close-ups and any matching data sheets to the corresponding inventory line. Match service history and storage location records to that same line rather than using the tray or rack location as the product type.

If a data sheet confirms a marking or construction, note the data-sheet match. If you cannot find a data sheet, keep the designation or construction detail labeled as unknown and provide the best available photos.

  • Evidence fields to include: photo reference; data-sheet match; service history; storage location.
  • Do not rely on tray location alone to indicate product type; use it only as storage location metadata.

Handling unknown or incomplete inventory

When information is missing or unclear, be transparent: mark the jacket designation or shielding as unknown and provide supporting photos and the measured footage. Keeping unknowns visible prevents misclassification and speeds subsequent inspection.

If reels lack legible markings, include all available evidence fields (reel ID, measured footage, fitted ends, storage location) and describe which fields are estimates. Buyers and reviewers will use those explicit unknown flags to direct focused inspection or to request lot-specific confirmation.

  • Do not invent designations when text is unreadable; flag unknown and provide photos.
  • Provide measured footage wherever possible and mark any estimate as such.

Illustrative record (not a purchased lot)

Use the following as a model inventory line when submitting control/tray cable removed from a plant tray. This example demonstrates the required fields and how to record unknowns.

Keep this record as a template for each distinct assembly you list.

  • Line: CT-SH-11
  • Product: TC-ER marking, 12 conductors, 16 AWG; shielding unknown
  • Length: 240 ft continuous, measured
  • Condition: removed cable; fitted ends present

Before the first call

Your questions,
answered.

Is cable found in a tray automatically Type TC?

No. Do not assume tray location means Type TC. Follow Step 1: transcribe the exact jacket designation from the printing. If the designation is unreadable, mark it 'unknown' and attach photos. Also include manufacturer, part number and marked voltage fields so reviewers can confirm product type rather than relying on tray origin.

How should pair count and shielding differences be shown?

Create separate inventory lines for any change in conductor or pair count, gauge or shielding. Use Step 2 fields: conductor/pair count; gauge; shielding; jacket. If shielding cannot be confirmed visually, record 'shielding unknown' and include high-resolution photos and any data-sheet match that can clarify construction.

Can similar reels share one inventory line?

Only when they are truly identical in all recorded evidence fields. If conductor/pair count, gauge, shielding, jacket printing or marked voltage differ, split them into separate lines. When combining reels, list reel IDs and continuous footage for each reel under the same line so quantity basis and reel traceability remain clear.

What if the jacket designation is unreadable?

Mark the designation as unknown and supply supporting photos, measured footage and reel IDs. Follow Step 4 to attach label photos and any service history. Where key evidence is missing, be explicit that the designation is unknown—this prevents the common mistake of defaulting to Type TC and ensures buyers can request targeted inspection or clarification.

Sources

Further reading

  1. City of Sterling Heights Automotive & Advanced Manufacturing
Call now