Separate similar-looking control and tray reels
Control and tray cable often arrives as a group of multi-conductor reels that look alike from a distance. The decision for this page is not whether the group came from one project; it is whether each reel has a distinct, documented construction. A reel marked TC-ER with twelve 16 AWG conductors is not interchangeable with a reel whose tag shows a different conductor count, pair arrangement, shield, or jacket designation.
Begin a row for each construction difference. Copy the readable jacket legend or tag text, then record manufacturer, part number if available, conductor or pair count, gauge, shielding, and marked voltage. Do not use a room, tray location, or project nickname as the product identity. If the printing is worn, enter unknown rather than filling the field from a neighboring reel.
- Assign a stable reel reference before taking photographs.
- Transcribe the printed designation exactly instead of shortening it to a general category.
- Keep conductor-count, pair-count, gauge, and shield differences on separate rows.
Use Durham context without treating it as inventory evidence
Durham Economic Development identifies local life-science sectors including pharmaceutical and biopharmaceutical manufacturing, medical devices and diagnostics, clinical and contract research organizations, and gene therapy.
That local context can make a life-science project change or facility closeout a realistic setting for this documentation task. It does not identify any offered cable, establish a customer relationship, or indicate that any particular construction is available. The physical reel and its records remain the evidence for a seller submission.
Create a reel-to-record evidence chain
Photograph the reel tag, a readable stretch of jacket printing, and the full reel or coil. Give every image the same stable reference used in the inventory, such as CT-DUR-01-tag.jpg. Attach a data sheet only when its part number or designation matches that exact row; a general sheet for a similar cable should be listed as unmatched, not treated as proof.
Then record the remaining continuous length and its basis. Measured footage, a documented balance, and a visual estimate are different statements. Also state whether the item is uninstalled stock, a partial reel, or cable previously taken from service, plus fitted ends, visible jacket issues, and known storage exposure. These distinctions prevent one reel from standing in for the whole group.
- Match every photo filename to one inventory reference.
- Label footage as measured, documented, estimated, or unknown.
- Keep data-sheet links with the row they actually support.
Keep release information connected to the reel list
For each storage grouping, note the city or ZIP, access limits, available loading resources if known, and the person or role that can authorize release. A release contact for one area should not be copied to a separate reel whose ownership or access is unresolved. State an unknown authority plainly; it is more useful than an implied approval.
A common listing mistake is to call all material from a tray or research project one Type TC quantity and apply a single reel’s footage to the rest. The workable correction is a separate line for each marked construction, a photo link for each line, and explicit unknowns where the record cannot support a field. This preserves the information needed for a lot-specific buying discussion without inventing an acceptance decision.
Work a fictional row before sending the inventory
Illustrative only—not a purchased lot: CT-DUR-01 is a partial reel with a photographed TC-ER marking, twelve 16 AWG conductors, shielding unknown, and 240 ft of measured continuous length. Its row notes fitted ends, a prior-use history that is otherwise unknown, and a tag photo, while the matching data sheet field remains unknown. The record is useful because it distinguishes observed facts from missing facts.
Use the same structure for actual inventory: reel reference, readable marking, construction fields, length basis, condition, storage location, and release authority. A spreadsheet and photos can be emailed to saleselectricalbuyers@gmail.com after the records are assembled. Keep the material and records stable while the specific lot is discussed.
