Keep copper inventory and weight bases separate
Identified copper wire, multi-conductor cable, and mixed short pieces should not be described as one uniform copper quantity. A useful seller record tells the reviewer whether a line is traceable continuous cable or a material group whose stated weight includes insulation, a reel, packaging, or other nonconductor components.
Begin with markings or matching records rather than color or a broad metal label. Then keep each construction and disposition on its own line, so the inquiry can retain continuous footage where it exists without assigning a conductor-only amount to a loaded reel.
- Separate bare conductor, insulated single-conductor wire, multi-conductor cable, and mixed pieces.
- Record a documented cable length separately from any gross or net weight.
- Label metal as unconfirmed when the record does not support it.
Step 1 — Verify conductor identity
Use the supplied evidence fields to confirm conductor metal and product identity. Preferred evidence includes legible jacket printing, manufacturer part numbers, product designations and matching product or inventory records tied to the specific reel or coil. If you cannot supply those items, mark the line as unconfirmed and supply photos of markings and both ends of the cable so the lot remains reviewable.
We expect sellers to attach the following evidence fields for each line: conductor metal, manufacturer/part number, designation, and any matching record. When evidence is incomplete, explicitly state that metal and identity are unconfirmed rather than substituting an assumed copper conductor.
- Provide jacket printing close-ups and date-stamped photos
- List manufacturer and part number exactly as printed
- Mark "unconfirmed" when records or markings are missing
Step 2 — Separate construction and disposition
Do not collapse different constructions into a single line. Keep bare conductor, insulated single-conductor, multi-conductor cable, identified continuous stock (reel-by-reel footage) and recovery-only pieces on separate inventory lines. Use the construction and condition/history evidence fields so each line communicates whether the material is continuous and identifiable or mixed pieces intended for recovery.
For example, label a partial reel of identified insulated conductor as a continuous stock line and list mixed clipped pieces as a separate recovery-only line. That separation prevents a single advertised total from combining different bases and avoids the mistake described in this brief.
- Separate lines by construction: bare, insulated, multi-conductor, mixed pieces
- Record conductor count and insulation type for multi-conductor cable
- Attach condition and history notes to explain previous use or partial reels
Step 3 — State the quantity basis clearly
Every line must state its quantity basis: continuous footage per reel, reel count, gross loaded reel weight, cable-only weight, net conductor weight (only if documented), or unknown. Do not convert a gross loaded reel weight into an assumed conductor weight in your description or totals. If you only have a loaded reel scale figure, report it as a gross figure and state what is included (wooden reel, insulation, packaging).
The evidence fields you must supply here are continuous length, reel count, weight basis, and packaging/reel included. If continuous footage is not measured, keep the length field blank and mark the line as weight-based with the precise gross/net designation noted.
- Report scale figures with explicit gross or net basis
- List continuous footage per reel when measured
- If unknown, mark weight basis as unknown and do not estimate conductor-only weight
Step 4 — Attach release and location details
Provide location, release authority and loading access information for the actual lot. Include date-stamped photos tied to each inventory line and a clear photo reference. These items are required so a reviewer can confirm the physical lot and access logistics without assuming the lot contents from a label alone.
Required evidence fields for this step are photo reference, location, release authority and access/loading. If any of these details are missing, flag the line and supply the missing items before expecting a final review.
- Attach photos showing reel ends, markings and the storage area
- List who can authorize release and any access constraints
- State loading access and equipment available at the storage site
Illustrative record and common mistake
Do not advertise a loaded reel weight as pure copper without qualification. The common mistake we see is a 900 lb loaded wooden reel described as 900 lb of copper or listing insulated and mixed pieces combined into one copper total. Follow the resolution: report the scale figure with its gross or net basis, identify construction from records, and keep continuous identified cable separate from mixed recovery-only material.
Illustrative only — not a purchased Greenville lot: reference CU-GVL-02 — identified insulated copper conductor — 900 lb gross loaded reel; conductor weight unknown — continuous footage not yet documented — partial reel; storage history to be supplied. Use this format when you cannot yet document conductor-only weight or length.
Greenville context, kept limited
Invest Greenville says Greenville Utilities Commission has electric, water, sewer and natural-gas capacity and flexible facilities for business needs.
This is limited context for asking about the actual storage and release setting of a cable line; it does not indicate that Industrial Wire Buyer has a facility there or that a local lot exists.
