WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Raleigh, North Carolina Control & Tray Cable Buyers

Industrial Wire Buyer: we buy control and tray cable in Raleigh, North Carolina. For a buying review, give each marked construction its own line rather than combining cable by tray location. Capture the product designation, conductor or pair count, gauge, shield arrangement, continuous length, condition, and release record; call unreadable fields unknown.

Control and tray specifications Raleigh, North Carolina

SELLER TASK / BEFORE YOUR QUOTE

Do the actual jacket marking and records distinguish TC/TC-ER or other designation, conductor or pair count, gauge and shielding for every line?

THE PROBLEM TO RESOLVE

Similar-looking multi-conductor inventory is easily combined by storage location, even when conductor/pair count, shielding or product designation differs.

MAKE THIS DECISION

Do the actual jacket marking and records distinguish TC/TC-ER or other designation, conductor or pair count, gauge and shielding for every line?

Evidence to have ready

  • jacket designation
  • manufacturer
  • part number
  • voltage marking
  • conductor count
  • pair count
  • AWG
  • shield arrangement
  • jacket
  • reel ID
  • continuous footage
  • measured/documented/estimated
  • fitted ends
  • photo reference
  • condition status
  • source context
  • storage location
  • access restrictions
  • release authority

Avoid this record: All cable removed from a tray is classified as Type TC, and shielded and unshielded reels are combined.

Better record: Use actual markings and matching documents, retain separate lines for count and shield differences, and mark unreadable designation unknown.

Illustrative fictional record — not a purchased Raleigh lot

Worked inventory record

inventoryRef
RA-CT-012
designation
TC-ER marking photographed
construction
12 conductors, 16 AWG; shielding unknown
quantity
240 ft continuous, measured
condition
removed cable; fitted ends present
release
owner authorization not yet documented

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Why separate control and tray cable lines matters

Multi-conductor cable that looks similar in a tray can differ in critical ways: designation (for example TC vs TC-ER), conductor count, pair count, AWG and shielding arrangement. Combining those items by storage location alone leads to misclassification and lost information. Our workflow is designed to preserve visible markings and discrete reel evidence so each continuous length can be evaluated on its own merits.

We require documentation tied to the physical item: photographed jacket designation, reel tags, and measured continuous footage. When unreadable markings exist, mark that designation unknown rather than merging incompatible reels.

The Raleigh Water CIP project list includes a D.E. Benton Water Treatment Plant 6MGD pump, E.M. Johnson treatment-plant electrical generator improvements, and 30- and 36-inch transmission-main projects. Those entries provide limited local treatment-plant context only; they do not identify the source of a seller’s cable, which still must be separated by its own printed designation and construction.

  • Separate lines for each conductor/pair/gauge/shield combination
  • Record jacket designation exactly as printed (TC, TC-ER, PLTC, etc.)
  • Match photos and reel IDs to continuous footage and fitted ends

Step 1 — Transcribe the actual designation

Photograph and transcribe the full printed jacket designation on each reel or continuous length. Do not infer designation from the tray or previous labels. Record manufacturer, part number and any voltage marking that appears on the jacket.

If the jacket marking is partly readable, capture the best available photo, transcribe exactly what you see and note the unreadable portions. If no readable marking exists, mark the designation unknown and provide other evidence fields.

  • Evidence to collect: jacket designation, manufacturer, part number, voltage marking

Step 2 — Keep conductor and pair variants apart

Create separate inventory lines for different conductor counts, pair counts, gauge (AWG) and shielding arrangements. For example, 12 conductors 16 AWG with overall foil is distinct from 12 conductors 16 AWG unshielded, and both are distinct from a 24-conductor construction.

When documenting, list conductor count, pair count if relevant, AWG and shield arrangement explicitly. If pair counts are implied by construction (e.g. twisted pairs within a multi-conductor), describe them in the pair count field rather than a generic conductor count.

  • Evidence to collect: conductor count, pair count, AWG, shield arrangement, jacket

Step 3 — Preserve reel and end evidence

Match each reel’s tag, data sheet and photos to the continuous length you report. Report fitted ends and whether lengths are continuous, measured, documented or estimated. If reels are cut into multiple lengths, document each continuous length as a separate record with photo references.

Continuous footage should be measured or clearly estimated; indicate the basis (measured/documented/estimated) and include the photo reference and reel ID for traceability.

  • Evidence to collect: reel ID, continuous footage, measured/documented/estimated, fitted ends, photo reference

Step 4 — Describe source and release

State whether the item is uninstalled stock, overrun or removed cable and provide storage location, access restrictions and the documented release authority. If ownership or release authorization is not yet documented, state that explicitly so we know the lot cannot be released until ownership is confirmed.

Provide context for condition status (for example removed cable with fitted ends) rather than assuming unused stock. Accurate source and release information speeds review and reduces the risk of misclassified lines.

  • Evidence to collect: condition status, source context, storage location, access restrictions, release authority

Handling unreadable or incomplete inventory

When markings, reel tags or construction details are unreadable or missing, be explicit: mark designation unknown, record what evidence is missing and supply as many other fields as you can (for example conductor count, continuous footage and fitted ends).

Do not combine unreadable reels with clearly marked reels. Retain them as separate lines flagged for further inspection so each can be resolved or rejected based on documented evidence rather than assumption.

  • Flag unreadable designation as unknown rather than applying a presumed type
  • Keep shielding-unknown reels separate from confirmed shielded/unshielded lines

Illustrative fictional record

The following record is an example of how to complete the required fields for a single continuous length. It is illustrative and is not a purchased Raleigh lot.

Use this format for each separate line you submit so reviewers can compare jacket markings, reel ID, continuous footage and release authority without conflating distinct constructions.

  • Inventory Ref: RA-CT-012
  • Designation: TC-ER marking photographed
  • Construction: 12 conductors, 16 AWG; shielding unknown
  • Quantity: 240 ft continuous, measured
  • Condition: removed cable; fitted ends present
  • Release: owner authorization not yet documented

Before the first call

Your questions,
answered.

Is every cable found in a tray Type TC?

No. Do not assume tray location defines the printed designation. Follow Step 1: photograph and transcribe the jacket designation for each reel or continuous length. If the marking reads TC or TC-ER, record that exact string along with manufacturer and part number. If the jacket is unreadable, mark the designation unknown and supply conductor count, continuous footage and photo evidence so the line remains distinct for later inspection.

Which conductor and pair counts must be separated?

Separate any items that differ in conductor count, pair count or AWG. For example, a 12-conductor 16 AWG construction is a different inventory line from a 24-conductor 16 AWG construction; likewise, pairs within a multi-conductor cable should be recorded in the pair count field. Use Step 2: create separate lines listing conductor count, pair count and AWG explicitly, and attach photos showing cross-section or jacket legends when available.

How should shield uncertainty be recorded?

If shielding cannot be confirmed visually, record shield arrangement as unknown and keep that reel separate from confirmed shielded or unshielded reels. Follow Step 2 and Step 3: note shield arrangement in the evidence fields, document fitted ends and provide photos of the jacket and any exposed conductor ends. Do not combine shield-unknown reels with confirmed shielded reels; flag them for further inspection.

Can removed control cable be described as unused stock?

No. Describe actual condition status under Step 4. If the cable was removed from service, record 'removed cable' and note fitted ends or other condition details. If you cannot document release authority, state 'owner authorization not yet documented' rather than labeling it unused. Providing storage location, access restrictions and any release documentation accelerates review and prevents misclassification as unused inventory.

Sources

Further reading

  1. City of Raleigh — Raleigh Water Capital Improvement Program
Call now