Build a row that maps to one physical item
Give every reel or genuinely identical group a stable line ID and repeat it in the spreadsheet, photo filenames, storage-site field, and any related document. Record the specification group, reel count, footage per reel, condition, and whether the cable is full, partial, previously installed, or otherwise distinct. A grand total does not replace those line-level facts.
The defining task here is reconciliation: a reviewer should be able to start with a row and find the same reel, photographs, and storage location without guessing. If matching is not possible, separate the item as unknown rather than forcing it into the nearest group.
- Line or reel ID
- Photo filenames
- Specification group
- Storage site
- Reel count and length per reel
Keep quantity, weight, and condition bases separate
For each line, state remaining continuous footage and label it measured, documented, estimated, or unknown. Identify cut lengths separately from a continuous reel. If weight is known, say whether it is gross loaded-reel, cable-only, net, or another stated basis; if it is not known, leave it unknown.
A common error is dividing one total footage or weight across several sites. The practical correction is one row per reel or continuous piece, preserving the basis for every number and the physical differences that make two lines unlike each other.
- Continuous length
- Quantity basis
- Weight basis
- Whether reel or packaging is included
- Visible damage or storage exposure
Describe each site without assuming movement
Group the rows by actual storage address or facility area, then list reel dimensions, access restrictions, available loading information, and a release contact for that site. State unknown access information as unknown. That is preferable to predicting a vehicle, a collection date, or a handling method before the physical record and terms have been discussed.
For a multi-site inquiry, a shared product name is not enough to make inventory interchangeable. Site A and Site B can hold the same marked cable with different footage, condition, release contacts, or access limits, which is why each line keeps its own identity.
- Storage location
- Dimensions
- Access restrictions
- Known loading information
- Release contact
Use the local fact only to frame access records
The City describes West Five as east of Highway 217 and south of Beaverton Hillsdale Highway, with direct access to freight routes, Fanno Creek Trail and Downtown Beaverton. That route context makes it sensible to state real access and loading constraints for each storage site, but it does not promise transport or prove that a particular lot is available.
The material record stays primary: cable marking, quantity basis, and condition belong on each row before site facts. Beaverton location information helps explain where a reel is stored; it does not turn several sites into one uniform line item.
- Use one storage-site field per row.
- Keep local context distinct from cable specifications.
- Do not replace dimensions or access notes with a neighborhood name.
Worked multi-site record and contact
Fictional illustration—not a purchased lot: BL-01 is one documented 500-foot reel at Site A with a matching product record; BL-02 is one estimated 90-foot reel at Site B with the same product description. Gross loaded-reel weight is unknown for both, Site A loading information is unknown, and Site B has a noted gate restriction. The rows remain separate because their quantities and site facts differ.
Email the spreadsheet and reel photos to saleselectricalbuyers@gmail.com or call +1 (614) 715-3047. Use the line ID in every photo filename and include the release contact for the site, so the material and access questions can be discussed against the actual records.
- Keep Site A and Site B on different rows.
- Use the stated footage basis on every row.
- Leave an unknown weight or loading field unknown.
