Read the assembly before naming the metal
A silvery exposed strand does not establish that every member of an assembly is aluminum. A feeder can include a distinct neutral, shield, support member or another metal. Start with the manufacturer designation, full part number and legible jacket text; retain the exact wording rather than replacing it with a visual assumption.
If the cable record identifies an aluminum feeder but does not identify the metal of a braid or other member, keep the feeder description and mark the unresolved member unknown. This is more accurate than classifying the entire assembly from one exposed surface.
- Manufacturer and full designation
- Conductor-metal evidence, not appearance alone
- Part number and conductor size
- Separate fields for neutral, shield and support members
Keep documented assembly details with the reel
Record AWG or kcmil size, insulation, marked voltage and any neutral, shield or support information only where the tag, jacket or matching record supports it. Tie those fields to a reel ID. A product sheet for a similar feeder is not a substitute for a record that matches the offered reel.
Then record the remaining continuous footage and say whether it is measured, documented or estimated. A partial reel should not inherit the original shipped footage just because the label is still attached.
- Reel ID and continuous footage
- Measured, documented or estimated quantity basis
- Full or partial status
- Documented insulation and marked-voltage fields
Describe condition and access without altering the cable
Photograph readable tags, jacket printing, accessible ends and reel identification. Note exposed ends, flange damage, visible jacket condition, reel dimensions, storage location and access restrictions. Do not strip or cut a conductor merely to resolve a metal question; preserve the material and the existing evidence.
Weight should carry a basis as well. State gross, net or unknown rather than supplying an unexplained number. The record is a seller description, not a condition certification or an acceptance decision.
- End condition and visible jacket or flange notes
- Reel dimensions and gross, net or unknown weight basis
- Storage and access facts
- Photo references matched to the reel ID
Use Beaumont port context only as a storage prompt
The Port of Beaumont lists rail movement, docks and wharves, sheds and lots, project cargo, metals, liquid bulk, dry bulk and intermodal cargo routes among its facilities and capabilities. It does not establish an aluminum lot, a customer, or port access for a buyer. It is relevant only because a seller with large feeders should describe the exact storage area, reel dimensions and practical access for the particular inventory.
When a location is private or the access facts are incomplete, say that. A precise unknown is better than treating a general storage setting as proof of handling capability or release authority.
Worked example: preserve the unresolved member
Illustrative fictional record—not a purchased lot: AL-BMT-04 is described as “aluminum feeder designation from fictional reel tag; 4/0 AWG,” with 275 feet continuous and estimated. It is a partial reel with an exposed end noted. The verification field says “illustrative only; confirm actual metal and assembly records.”
The example does not claim that every member is aluminum. It shows how a seller can identify what the tag supports while leaving a shield, neutral or other component unknown until matching evidence is available.
