WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Sell Industrial Cable Lots in Salt Lake City, Utah

Sell surplus industrial cable from Salt Lake City, Utah through Industrial Wire Buyer. A facility closeout is easier to review when each power, motor, or multi-conductor cable line is tied to its actual marking, construction, history, and release authority. Department names and equipment labels are useful background, but they do not identify the cable on the reel.

Plant and motor cable Salt Lake City, Utah

SELLER TASK / BEFORE YOUR QUOTE

Can each industrial cable item be traced to its actual marking, construction, history and release authority?

THE PROBLEM TO RESOLVE

Plant, healthcare or life-science closeouts can mix power, motor and multi-conductor cable; an equipment or department name does not identify the cable construction or whether it was removed.

MAKE THIS DECISION

Can each industrial cable item be traced to its actual marking, construction, history and release authority?

Evidence to have ready

  • reel ID
  • manufacturer part number
  • product designation
  • marked voltage
  • data-sheet reference
  • conductor count and size
  • metal
  • shield or armor
  • jacket
  • fitted ends
  • service history
  • release authority

Avoid this record: A plant equipment name is used as the specification for several visually similar cable reels, and removed cable is presented as maintenance stock.

Better record: Use the actual jacket or product record for each line, keep removed history separate, and mark any construction or history that cannot be supported as unknown.

Illustrative fictional record — not a purchased lot

Worked inventory record

reference
SL-IC-02
product
manufacturer part number recorded; 4 conductors, 6 AWG
shield
unknown
quantity
420 ft documented
condition
uninstalled maintenance stock

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Use product evidence instead of a facility label

A plant or department name may describe where a reel was stored, but it cannot establish whether the cable is power, motor, or another multi-conductor assembly. Start each line with a reel ID, readable jacket printing, manufacturer part number, product designation, marked voltage, and a matching data-sheet reference when one exists.

Salt Lake City’s Department of Economic Development says the city is home to more than 20,000 businesses and identifies logistics, manufacturing, distribution, healthcare and life sciences among its key industries. This is context for facility closeouts, not a claim that any named organization has cable available. For a seller, the relevance is practical: records from different departments should be linked to the reel’s own construction rather than used as a substitute for it.

  • Reel ID and manufacturer part number
  • Product designation and marked voltage
  • Jacket-photo and data-sheet references
  • Unknown field noted rather than inferred from equipment

Describe construction and fitted ends as separate evidence

Record conductor count and size, conductor metal, shield or armor, jacket designation, and fitted ends as separate columns. Do not fill in a shield, metal, or rating from a look-alike reel. A precise unknown is more useful than a plausible-looking specification that cannot be traced to the offered cable.

Photographs should show the tag, the legible legend, the overall reel, and accessible ends where available. They document what was observed; they do not establish electrical condition or a future application.

  • Conductor count and size
  • Metal and shield or armor details
  • Jacket designation and marked voltage
  • Fitted ends and visible condition

Separate unused stock from cable with a service history

Keep uninstalled maintenance stock, project overrun, and cable removed from service on distinct lines. For each line, state known service history, continuous length, storage exposure, and visible damage. The inventory mistake to avoid is presenting cable with a removal history as if it were uninstalled stock because both items occupy the same storeroom.

If the history is missing, mark it unknown and attach the available record or photo reference. Do not merge that line with documented stock merely to make the list shorter.

  • Condition category: stock, overrun, removed, or unknown
  • Continuous length with measured, documented, or estimated basis
  • Known storage exposure and visible damage
  • Separate line for unknown construction or history

Map authorization and access without assuming a handling service

Identify the owner, department, or other party that can authorize release of each offered item. Then record the storage location, access restrictions, and loading resources the seller knows about. These facts help frame a realistic lot discussion and avoid implying that removal, loading, or transport has already been arranged.

When an internal approval is pending, name the status and the record or contact that may resolve it. A cable line can remain in the submission as release pending without being presented as already releasable.

  • Owner or release authority
  • Storage location
  • Known access restrictions
  • Available loading resources and release-pending note

Worked fictional facility line

A fictional record can show the intended level of detail: SL-IC-02; manufacturer part number recorded; 4 conductors, 6 AWG; shield unknown; 420 ft documented; uninstalled maintenance stock. It is illustrative and not a purchased lot. The shield remains unknown because neither the field nor the supporting record should be guessed.

For a removed cable line, use the same structure but state its history and condition directly. Keeping the two records separate preserves the decision this page is meant to answer: whether construction and history are traceable for each offered line.

  • Reference: SL-IC-02
  • Construction: 4 conductors, 6 AWG
  • Shield: unknown
  • Quantity: 420 ft documented

Before the first call

Your questions,
answered.

Can a mixed facility cable inventory be submitted?

Yes. Put each reel or continuous length on its own line with its actual marking, construction, history, quantity basis, and release information. Do not group by department name alone.

What distinguishes motor, power, and other industrial cable?

Use the readable jacket designation and matching manufacturer record. Record conductor count and size, metal, voltage, shield or armor, and fitted ends instead of relying on the machine or room name.

How should cable removed from service be described?

Keep it separate from uninstalled stock. State its known service history, continuous length, storage exposure, visible condition, and any unknowns without making a condition claim.

Who should be listed as release authority?

List the owner, department, or authorized custodian who can release the specific inventory. If that has not been confirmed, say release pending and identify the available record or contact path.

Sources

Further reading

  1. Salt Lake City Department of Economic Development — Business Development
Call now