Create a building-wire specification line
Begin by creating a single inventory line for each distinct wire specification. Do not combine colors or gauges: each manufacturer designation and marking is a separate line item when it identifies a different product or intended use.
Transcribe manufacturer and part number exactly as printed, then copy the cable marking string (for example THHN, THWN-2 or XHHW-2) and the conductor metal, AWG/kcmil and marked voltage. If a color is only a jacket color and does not change the designation, note it but keep the line grouped under the same designation.
Required evidence fields for this step: manufacturer and part number; THHN/THWN-2/XHHW-2 or exact marking; conductor metal; AWG/kcmil; marked voltage.
Sandy City’s Economic Development Agency describes its mission as facilitating an exceptional regional commercial center with quality employment, office space, and retail shopping and entertainment. That is local context only; it does not identify a contractor, project, or offered reel. A commercial-job remainder still needs its own markings, present balance, and release record.
- Do: record exact printed markings and manufacturer part numbers.
- Do not: merge multiple gauges or markings into one combined footage total.
Reconcile present footage reel by reel
For each current reel, match it to the purchase order or project record and record the present continuous footage. Keep the record as measured, documented or estimated — don’t substitute the original invoice footage unless you can confirm the current balance.
Record the reel ID (from tag or stamped reel), the current footage per reel, the quantity basis (continuous footage, coil, or number of cut lengths) and whether the reel is full or partial. If a reel was partially used and rewound, note that as a partial status; if you estimate footage, label it explicitly as estimated.
Required evidence fields for this step: reel ID; current footage per reel; quantity basis; full or partial status.
- Label estimates clearly: e.g., “650 ft continuous, estimated.”
- If a reel’s tag is missing or unreadable, treat footage as unverified until photographic or written corroboration is provided.
Photograph building-wire condition without changing stock
Photograph each reel’s readable tag, close-up jacket printing, an overall reel overview and any visible damage. Keep photos that show exposure (sun, moisture), missing labels, or damaged insulation, and separate images for coils or cut lengths from continuous reels.
Do not remove or alter tags, and do not unwind reels to guess footage. The record should describe condition and photo references but must not change the inventory during inspection.
Required evidence fields for this step: photo reference; storage exposure; missing label or damaged insulation; cut-length status.
- Include at least one overview shot and one close-up of the marking or tag for every reel.
- Note storage exposure such as indoor pallet racking, dock, or uncovered yard in the storage-location field.
Establish project release boundaries
For each item, indicate if it is available for release, reserved for job completion, or pending owner confirmation. State who can authorize release by name and role (project manager, purchasing agent) and where the material is stored so access and loading notes can be planned.
If authorization or release authority is not supplied, mark the item as project status unknown and do not list it as available-for-release. This preserves seller and buyer expectations and prevents treating original order totals as current stock.
Required evidence fields for this step: available-for-release flag; release authority; storage location; access/loading notes.
- Record exact contact role for release: e.g., “Project manager — name required.”
- If an item is reserved, mark it reserved and attach the reserver’s identifier rather than listing it available.
Resolve incomplete building-wire balances
If tags are missing, footage is unknown, or documentation conflicts with the physical count, treat those items as unverified. Assign an evidence status of estimated or unverified and request measurement or owner confirmation before offering the item as available-for-release.
Use separate lines for cut lengths and coils; do not roll cut lengths into a reel’s continuous footage. Keep the record transparent about what was measured, what was estimated, and where gaps remain so a buyer can evaluate inspection or pickup contingencies.
When you cannot confirm release authority, include the storage location and access notes but leave the available-for-release flag unset until authorization is provided.
- Mark unverified footage explicitly: e.g., “estimated” or “owner confirmation required.”
- Preserve the current condition: do not alter reels to make tags readable or restructure stock materially during documentation.
Commercial reel example and correction
Do not repeat the common error in the brief: listing the original invoice footage for multiple mixed-gauge reels as a single copper-wire total. Instead split each designation and reel, preserve the current balance and quantity basis, and mark any reserved or unverified quantity.
Example (illustrative only — not a purchased lot): reference BW-SANDY-01, designation THHN/THWN-2, 12 AWG copper, black; quantity 650 ft continuous, estimated; one partial uninstalled reel; release: project status unknown; authorization not supplied. Use separate inventory lines for other gauges or colors rather than summing them.
- Resolution checklist: split each reel and designation; record reel IDs and footage; attach photos; mark reserved or unverified quantities.
