WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Electrical Wire Buyers in Burlington, Vermont

We buy electrical wire from Burlington, Vermont sellers when each reel can be identified and its current continuous balance is clear. For building-wire leftovers, send one line per reel with exact printing, conductor size and metal, remaining footage, quantity basis, condition, location, and the person able to authorize release for a lot-specific review.

Building-wire reels Burlington, Vermont

SELLER TASK / BEFORE YOUR QUOTE

Does each offered building-wire reel show its exact printed designation and current continuous quantity?

THE PROBLEM TO RESOLVE

Contractor or distributor records may preserve original purchase footage while actual partial building-wire reels have different balances and mixed gauges.

MAKE THIS DECISION

Does each offered building-wire reel show its exact printed designation and current continuous quantity?

Evidence to have ready

  • reel reference
  • conductor metal
  • exact jacket designation
  • AWG or kcmil
  • continuous footage
  • quantity basis
  • condition
  • release authority

Avoid this record: Five building-wire gauges are combined under one original purchase-footage total.

Better record: Split each reel by designation and gauge, retain its current footage, and label any estimate instead of presenting it as a balance.

Illustrative inventory example—not a purchased lot

Worked inventory record

reference
BW-BTV-01
designation
THHN/THWN-2, 12 AWG copper, black
current quantity
650 ft continuous, estimated
condition
partial uninstalled reel; tag photographed

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Start with one physical reel record

Treat a full reel, a partial reel, a coil, and a cut length as different inventory records. Give each item a short reference such as BW-BTV-01, then use that reference in the list and photo filenames. Keep copper and aluminum on separate lines even when their jacket colors look alike. This makes it possible to compare the description to the actual item rather than to a project summary.

The inventory mistake this page addresses is a single line that combines several gauges with the original order total. That record hides what remains. For each reel, state whether it is full, partial, coiled, or a cut length; record the current amount independently; and leave an unavailable or unknown balance visible instead of folding it into a total.

  • Reel reference and physical form
  • Conductor metal and visible jacket color
  • Current location and photo filename match

Transcribe building-wire identity before grouping

Photograph the reel tag and a readable stretch of jacket printing. Transcribe the manufacturer, part number when present, designation such as THHN, THWN-2, or XHHW-2, AWG or kcmil size, and any marked voltage. Color can help locate a line in storage, but it is not a substitute for the printed designation. If a marking cannot be read, record it as unknown rather than borrowing information from another reel.

Only group reels after their printed specification actually matches. A 12 AWG copper reel and a different gauge or insulation designation should remain separate even if both came from the same job. This is a building-wire identification workflow, distinct from the surplus page’s current-availability reconciliation across many cable families.

  • Manufacturer and part number
  • Exact jacket designation
  • AWG or kcmil and marked voltage

Reconcile what remains today

Record continuous footage per reel and label the basis as measured, documented, or estimated. An original tag may describe the quantity supplied, not the quantity remaining. Where both figures are known, show the original amount as historical and the current balance as the inventory quantity. Do not combine several short pieces into a claimed single continuous length.

A clear partial-reel line also notes exposed ends, visible jacket damage, missing labels, and known storage exposure. These are condition observations, not a promise about suitability. A seller who has only an estimate can still make the record useful by identifying the estimate as such and attaching the photo evidence that supports the reference.

  • Continuous footage per reel
  • Measured, documented, or estimated basis
  • End condition and storage exposure

Add release and local context without inventing a lot

Burlington’s official economic plan identifies it as the core of northwestern Vermont’s regional growth center and describes a mixed economy that includes manufacturing, transportation and public utilities as well as health, education and retail. That is context for why a seller may have different contractor, facility, or distributor record formats; it does not identify a specific local inventory or buyer relationship.

For the actual lot, state the storage location, whether access is limited, who owns the wire, and who can authorize its release. If the material is associated with a project, record that as background only. The printed wire identity, current footage, condition, and release authority remain the useful decision fields.

  • Owner or release contact
  • Storage location and access limitation
  • Project context if known, otherwise unknown

Worked record and incomplete information

Illustrative example—not a purchased lot: BW-BTV-01 is a partial reel with the tag and jacket printing photographed. Its record lists THHN/THWN-2, 12 AWG copper, black, and 650 ft continuous estimated; the original reel quantity is retained separately if known. The estimate is not converted into a documented balance.

When a tag is missing, create an unknown-designation line rather than assigning the nearest reel’s details. Keep that line’s condition, location, and photos with it. This preserves a workable inventory list while making clear which facts still need confirmation.

  • Reference: BW-BTV-01
  • Designation: THHN/THWN-2, 12 AWG copper, black
  • Quantity: 650 ft continuous, estimated
  • Condition: partial uninstalled reel; tag photographed

Before the first call

Your questions,
answered.

Can partial building-wire reels be submitted?

Yes. Keep each partial reel on its own line with exact jacket or tag printing, conductor metal, size, current continuous footage, quantity basis, and visible condition. Do not blend its remaining balance into the original reel quantity or a mixed-gauge total.

Is jacket color enough to identify electrical wire?

No. Use readable jacket printing and the reel tag to record the designation, size, manufacturer, and voltage marking. Color may be recorded for locating the reel, but an unreadable designation should stay unknown.

How should original and remaining footage appear in the list?

Use separate fields. Label the original amount as historical if it is available, then state the current footage as measured, documented, or estimated. The current per-reel balance is the useful quantity for review.

What if the reel label is missing?

Assign a reference, photograph the remaining jacket printing and overall reel, and mark unavailable fields as unknown. Keep it separate from identified reels rather than applying a neighboring reel’s specification.

Sources

Further reading

  1. City of Burlington Economic Development Plan
Call now