Capture the legend that identifies the assembly
Read and photograph the printed jacket designation before assigning a type. Record the manufacturer, part number, marked voltage, and exact visible terms such as TC, TC-ER, PLTC, or another designation only when the cable or matching record supports it. A storage tray, room, or project name does not independently identify the assembly.
Give each reel or continuous piece a reference and attach the photo showing the legend to that reference. If a jacket section is unreadable, preserve the readable text and mark the rest unknown. Do not use the clear marking on one reel to complete the record for another reel that merely looks similar.
- Photograph the printed designation and the reel label.
- Record manufacturer, part number, and marked voltage as shown.
- Keep unreadable designations as unknown lines.
Split counts, shields and jackets before totaling
Use separate lines for different conductor counts, pair counts, gauge, shielding, jacket construction, and continuous length. A difference in a drain wire, foil, braid, number of pairs, or printed designation is a reason to retain separate evidence. Totaling first can obscure the very feature that distinguishes one control-cable record from another.
For each line, state what is known and what is not. If a cut end reveals only part of an assembly, do not infer a complete shield arrangement or pair count. The useful record is precise about the observed fields and open about the fields that cannot be verified from available evidence.
- Keep conductor count and pair count as separate fields.
- Record shield arrangement only when supported by evidence.
- Retain continuous footage for each individual reel or piece.
Keep history and visible condition in separate fields
Record whether the cable is uninstalled stock, project overrun, or previously in service, then describe accessible ends, visible jacket condition, and known storage history. These facts explain the offered item without converting a photograph into a broad conclusion about its performance. Match condition photos to the same reference that carries the cable specification.
If a termination, fitted end, or exposed cut is visible, describe it plainly. If an end does not reveal a construction feature, mark that feature unknown. Keeping history, condition, and construction in different fields stops one incomplete observation from being treated as proof of the whole assembly.
- State condition history separately from product designation.
- Photograph accessible ends and visible jacket differences.
- Keep uncertain shielding or pair fields explicitly unknown.
Project context cannot classify tray cable
South Burlington’s Projects & Initiatives page lists the Bartlett Bay wastewater treatment facility upgrade, City Center/TIF work, stormwater projects, paving and other initiatives.
That public list gives a seller a legitimate way to describe a local project context, but it does not establish that a listed project used a particular cable or that a reel is available. A project name should remain background in the inventory. The actual Type TC or other designation, counts, shielding, footage, and release information must come from the offered cable and its matched records.
- Use a project name as context, not a product label.
- Keep jacket markings and project documents connected to the same reel.
- State release authority for the offered line.
Worked control-cable record
Illustrative example only—not a purchased South Burlington lot: CT-SB-02 has a photographed TC-ER marking, 12 conductors, 16 AWG, and 240 ft measured continuous. It is listed as previously in service with fitted ends present. The available evidence does not establish shielding, so the shield field is marked unknown rather than copied from another reel.
The error would be placing CT-SB-02 into a single total labeled Type TC because it was found in a tray. The correction is to keep the specific marking, count, footage, condition note, and unknown shield field on its own line. This example models a truthful record, not an actual offering.
- Reference: CT-SB-02.
- Marking: TC-ER photographed; 12 conductors; 16 AWG.
- Quantity: 240 ft measured continuous.
- Condition: fitted ends present; shielding unknown.
