What we need first: photographed markings and transcribed rating
Start by photographing the actual reel flange, stamped plywood, label or any permanent marking that identifies rated kV, manufacturer and the product designation. Transcribe the exact text from those photos into a single searchable field so reviewers can confirm the visible marking. If multiple markings appear, record all and note their location on the reel.
This step corresponds to the brief step “Capture exact rating” and the required evidence fields rated kV, manufacturer, part number and product designation. If the reel shows no permanent marking, state that explicitly and proceed to the construction and record-matching steps with that unknown preserved.
- Provide high-resolution photos of the reel flange and cable labels.
- Transcribe the exact marked kV, manufacturer name, and full product designation.
- Note if markings are painted, printed, stamped or on an adhered label.
Document construction only when shown or matched
Record conductor metal and size, insulation description and insulation level, and any shield or neutral details only when those details are visible on the cable jacket or directly match a record tied to that reel. If construction details cannot be demonstrated on the reel or by a clearly linked record, leave those fields explicit as unknown.
This reflects the brief step “Document construction” and the evidence fields conductor metal/size, insulation, insulation level and shield/neutral. Explicit gaps are acceptable and required when the evidence is missing; do not substitute a certificate from another batch.
- Photograph jacket markings, conductor ends (if accessible and permitted), and any shield/neutral identification marks.
- List conductor metal and nominal size only if shown or if a record explicitly names the reel.
- Mark construction fields as “unknown” when not demonstrably tied to the reel.
Match production and test records to the reel
Link any production, batch, inspection or test records to the reel by reel ID, batch/lot ID and record date. Describe the record scope—what was tested and what the record covers—and disclose storage history, end condition and missing end protection. If a certificate originates from a different batch or an unlinked reel, do not apply it to this reel; report it separately and mark the reel’s records as missing.
This is the brief step “Match history to the reel” and covers reel ID, batch/lot ID, record date, record scope, end condition and storage history. Where records exist but have ambiguous linkage, explain the linkage attempt and leave final linkage unresolved rather than misattribute.
- Provide file names, dates and brief summaries for each record linked to the reel ID.
- If no matching test record is found, state that clearly and indicate whether inspection was visual only.
- Disclose any observed moisture exposure, physical damage, or missing end caps.
List quantity, reel dimensions and release details
Report every continuous footage length on the reel, reel outside diameter and flange width, and an estimated gross or net weight basis. Identify the site’s release authority and any access or loading constraints so site access can be planned. These are the brief step “Report quantity and release” and the required evidence continuous footage, reel dimensions, gross/net/estimated weight, release authority and access/loading.
If lengths are broken or splice points present, document them and list continuous footage segments separately. If you cannot measure dimensions directly, supply the reel model or photograph with a scale to allow estimation and label estimates clearly.
- List each continuous footage value; do not combine segments unless they are spliced and documented.
- Provide reel dimensions (OD, flange diameter, width) or a photograph with a known-size reference.
- State the named release authority and any site hours, contact requirements or lift limitations.
Handling unknowns and preventing the common mistake
The common mistake is using a similar-looking reel picture or a certificate from another batch to fill missing kV, construction or test history. Our required workflow prevents that: every record and specification must be tied explicitly to the reel or left unknown. When you cannot tie a record, state the discrepancy, label fields as unknown, and include any evidence you did check.
An unlinked certificate is not proof that a reel has particular characteristics. Disclose the steps you took to match records and the specific gaps you could not close. A transparent discrepancy report speeds review and avoids later rework.
- Do not attach records unless they reference the reel ID, batch ID, or clearly matching markings.
- When a certificate exists for a different batch, upload it separately and explain its relation without applying its specifications to the reel.
- If end caps or protections are missing, photograph and describe the condition and note potential exposure risks for reviewer awareness.
