WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Control and Tray Cable Buyers in Redmond, Washington

We buy control and tray cable in Redmond, Washington when each reel is described by its actual jacket designation, conductor or pair count, shielding, and continuous footage. Do not classify cable by the tray or project where it was found. Build a per-reel record that separates similar-looking assemblies and keeps unknown markings visible.

Control and tray specifications Redmond, Washington

SELLER TASK / BEFORE YOUR QUOTE

Which control or tray cable reels genuinely match, and what continuous length and service-history record belongs to each reel?

THE PROBLEM TO RESOLVE

Multi-conductor reels can look alike while differing in TC, TC-ER, or other printed designation, conductor or pair count, shielding, and jacket details.

MAKE THIS DECISION

Which control or tray cable reels genuinely match, and what continuous length and service-history record belongs to each reel?

Evidence to have ready

  • designation
  • manufacturer
  • part number
  • photo reference
  • conductor count
  • pair count
  • gauge
  • shield
  • jacket
  • reel ID
  • continuous footage
  • quantity basis
  • status
  • fitted ends
  • data-sheet reference
  • unknown fields
  • visible damage

Avoid this record: Cable from a tray is classified as Type TC solely from its location and several conductor counts are combined in one total.

Better record: Treat location as background, transcribe actual markings, split differing assemblies, and retain each reel’s length and history.

Illustrative fictional inventory record—not a purchased lot

Worked inventory record

reel ID
CT-01
designation
TC-ER marking; 12 conductors, 16 AWG; shielding unknown
continuous length
240 ft measured
history/status
cable taken out of service; fitted ends present

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Transcribe the designation before naming the cable

Photograph and copy the complete readable jacket legend, including a TC, TC-ER, PLTC, or other printed designation if present. Pair the jacket photo with the reel tag, manufacturer, and part number. A location in a tray, control room, or project is background information; it does not establish the product designation.

If part of the legend is obscured, record the readable portion and mark the rest unknown. Do not promote a likely classification into a confirmed label. The useful next record is a better photo or a matching data sheet tied to that reel ID.

  • Designation
  • manufacturer
  • part number
  • photo reference

Split assemblies that merely look alike

Create separate lines when conductor count, pair count, gauge, shield, or jacket differs. A reel marked 12 conductors and a reel marked 16 conductors should not become a single control-cable total, even if their jacket color and storage shelf match. Keep the exact field values visible on the individual line.

Describe shielding as shown by a product record or mark it unknown. Do not infer foil, braid, or another construction feature from a partial photograph. This separation protects the seller from presenting a generic multi-conductor total that cannot be traced to the individual reels.

  • Conductor count
  • pair count
  • gauge
  • shield
  • jacket

Keep length and history with the reel

For each reel, report continuous footage and its basis as measured, documented, estimated, or unknown. Add status such as project overrun, uninstalled stock, or cable taken out of service, and show fitted ends where they are present. Two short pieces do not become one long continuous length when their footage is added.

Use the reel reference in photo filenames and any data-sheet filename. If a service history is incomplete, say unknown and retain the visible condition record. The page concerns clear inventory evidence, not a declaration about electrical suitability.

  • Reel ID
  • continuous footage
  • quantity basis
  • status
  • fitted ends

Attach evidence and state the gaps

Match readable jacket photos, labels, and existing data sheets to the same inventory line. Include visible damage and the precise unknown fields. A data sheet for a different part number should not be used as if it identifies the offered reel, and an unreadable legend should stay unreadable in the record.

A focused photo request is more valuable than an invented answer. The seller can note that the shield status is unknown, attach the corresponding jacket image, and leave the buyer with a specific field to review rather than an unreliable all-purpose cable description.

  • Data-sheet reference
  • unknown fields
  • visible damage
  • matching photo filenames

Keep the Redmond reference proportionate and fix tray-only classification

The City says its business resources include maps, parking, commuting resources and environmental considerations, plus building resources for property and commercial-land development. The City statement supports a practical storage and access context for a seller’s own project record; it does not show that any named business has control cable available or that a local transaction occurred.

The error is calling every cable from a tray Type TC and combining conductor counts. Correct it by using actual markings, separate assembly lines, and reel-level history. Illustrative fictional inventory record—not a purchased lot: CT-01; TC-ER marking; 12 conductors, 16 AWG; shielding unknown; 240 ft measured; cable taken out of service; fitted ends present.

  • Use location as background only.
  • Retain unknown fields instead of guessing a designation.

Before the first call

Your questions,
answered.

Is cable found in a tray automatically Type TC?

No. Record the actual jacket designation and any matching product record. A tray location may provide background, but it does not replace a TC, TC-ER, PLTC, or other printed designation. If the marking cannot be read, enter unknown and attach the related photo.

Which fields distinguish similar control-cable reels?

Keep conductor count, pair count, gauge, shield, jacket, manufacturer, part number, and designation on each reel line. Split the lines when any of those fields differs. Link each line to the reel ID and clear jacket or tag photographs.

How should cable taken out of service be described?

State the known history, continuous footage and basis, fitted ends, visible damage, and any unreadable fields. Keep it separate from uninstalled stock. The record describes what the seller knows; it should not make a condition or future-use assertion that the evidence cannot support.

When can matching reels be grouped?

Only when their recorded designation, conductor or pair count, gauge, shield, jacket, condition history, and continuous-length basis are genuinely the same. If a field differs or is unknown for one reel, use separate lines so the difference does not disappear inside a group total.

Sources

Further reading

  1. City of Redmond — Business
Call now