Turn a project handoff into a marked-reel record
A project title can explain why cable is in inventory, but it should never replace the product designation. Transcribe the manufacturer designation, conductor metal, AWG or kcmil, marked voltage, and neutral or shield configuration from the reel tag or a matching record. If a field is missing, mark it unknown rather than deriving it from the project name.
Keep different marked constructions on separate lines. Two reels may have the same intended application yet differ in conductor, rating, or configuration. The seller decision is whether each reel can be described from its own evidence, not whether the lot can be described with one broad underground label.
- Manufacturer designation
- Conductor metal and AWG or kcmil
- Exact marked voltage
- Neutral or shield configuration, or an explicit unknown
Keep quantity and physical condition tied to the reel
For each reel, record the reel ID, continuous footage, quantity basis, dimensions if known, gross, net, or estimated weight basis, and accessible end-protection condition. A documented length and an estimated length are different statements; retain the basis beside the figure instead of collapsing them into one total.
Photographs of the tag, visible jacket, reel, and accessible ends can help connect the record to the physical item. They document visible condition only. They do not establish a cable rating beyond its markings or make a claim about the condition of material that cannot be seen.
- Reel ID and photo references
- Continuous footage with measured, documented, or estimated basis
- Dimensions and gross, net, or estimated weight basis
- End protection and visible condition note
Separate the inventory record from project disposition
State whether the item is uninstalled stock, previously used cable, or uncertain condition, and record known storage history without overextending it. A project record may give background, but the seller should also identify the owner or release authority for the actual reel.
For a large reel, give the material location, access limits, available loading resources, and a requested release window as seller information. Those fields make a practical discussion possible without assuming anyone has agreed to inspect, move, or purchase the cable.
- Project context retained as background only
- Condition category and known storage history
- Ownership or release authority
- Storage site, access limits, and available loading resource
Use unknown fields to prevent a false uniform description
Illustrative record: SV-UD-02; distribution designation from reel tag; neutral configuration pending; 580 ft documented; gross weight includes packaging and exact value unknown; uninstalled warehouse reel; end protection status unknown. This is a fictional record, not a purchased lot.
It is better to have a line with a documented designation and a stated unknown than a fully filled line built from assumptions. If several reels lack a common field, keep them separate until their marked constructions and quantity records actually match.
- Do not treat “underground project cable” as a single construction.
- Keep project name and marked voltage in different fields.
- Preserve an unknown neutral or shield configuration rather than guessing it.
Spokane Valley project context with a defined limit
The city’s 2024 construction-season release named Pines Road/BNSF Grade Separation, Sprague Stormwater and Multi-Modal Improvements, Trent Avenue access-control work and Sullivan Park Waterline Project among its capital and transportation projects.
The release provides local project context for a hypothetical project-closeout record. It does not identify cable on any project, establish seller ownership, or show that Industrial Wire Buyer has purchased material connected to those projects. The reel-specific records above are the relevant buying evidence.
