What we need from each reel or continuous piece
Capture the complete construction exactly as printed on the jacket or reel tag. Transcribe the jacket legend, manufacturer name, full part number, conductor count and size, marked voltage, shield or armor, and any outer-jacket designation. If a field cannot be read on a jacket or tag, record it explicitly as unknown rather than guessing.
Why this matters: facility and machine names can look like product identifiers but are not a substitute for the jacket legend or a manufacturer part number. Use the printed product data to avoid the common mistake of copying a neighbor reel's shield, voltage, or construction.
- Required evidence fields: manufacturer; part number; conductor count/size; conductor metal; marked voltage; shield/armor/jacket
- If jacket printing conflicts with a nearby reel, prioritize the item’s own legend and document the discrepancy in the record
Tie records to the physical item
Match a specific data sheet, product drawing, or manufacturer document to the reel or continuous piece it describes. Record a reel ID, matching document ID, and a scope note describing what the document covers (e.g., part number revision and applicability to the recorded conductor sizes).
Photograph jacket-printing and the reel tag in the same image as the matching document or a legible snapshot. Do not attach a generic catalog page without noting how it was linked to that specific reel.
- Required evidence fields: reel ID; matching document ID; jacket-print photo; document scope
- If a document references multiple part numbers, note the exact line used for this reel
Separate prior-use runs from maintenance stock
Distinguish material that is unused, sealed, or stored as maintenance stock from continuous lengths removed from active active systems. For removed runs, describe known fitted ends, visible damage, and known service history; treat photos as illustrative of appearance, not as a condition test.
Keep records separate in inventory and list the unused/removed status explicitly. This separation prevents conflating a spare reel with a cut, used run from a machine or tray.
- Required evidence fields: unused/removed status; service history; fitted ends; jacket damage; storage exposure
- When ends are fitted, photograph them and record whether they are factory-sealed, field-terminated, or have mechanical fittings
Report usable quantity and piece counts accurately
Record each continuous length as its own line item. Distinguish measured lengths (measured with a tape or reel counter), documented lengths (length recorded on a reel tag or paperwork), and estimated lengths. Do not combine short pieces into a single run unless you can document they were in service or manufactured as a single continuous length.
List continuous length, quantity basis, piece count, and reel count separately so buyers and reviewers can understand how totals were derived.
- Required evidence fields: continuous length; quantity basis; piece count; reel count
- If length is estimated, state the method used for the estimate and mark the estimate clearly
How to handle unknown or incomplete jacket legends
If jacket printing is unreadable or missing, do not substitute a facility or machine name for construction details. Place all unresolved items into explicit unknown fields and provide photos showing the unreadable legend and the full reel context.
Record any partial strings exactly as seen, and include a high-resolution jacket-print photo and the reel tag photo. If a matching document exists, link it to the reel with a matching document ID and explain which fields the document confirms.
- Leave conductor metal, shield status, marked voltage, or part number as unknown when the jacket cannot be reliably read
- Document attempts to recover information (e.g., manufacturer inquiry or reel-unspooling checks) in the service history field
Common error and the correct workflow
A frequent mistake is using a nearby facility or machine name as the cable specification, or copying shielding/voltage details from a neighboring reel. The resolution is procedural: always use the actual jacket printing and a traceable product record for each reel; if information is missing, record it explicitly as unknown and keep removed material separate.
Follow the seller steps in this brief: capture the full construction, tie records to the specific item, separate history and ends, and report usable quantity accurately. Those four steps, repeated for each line, create a defensible inventory that separates look-alike constructions.
- Seller task: Use the jacket legend first; match a document to the reel second; separate removed vs unused third; record lengths fourth
- Illustrative example (not a purchased lot) shows how fields should appear and be labeled
Aurora infrastructure context, limited to scope
Aurora Water’s mission is to deliver safe, reliable, high-quality and sustainable water, sewer and stormwater services, supported by advanced infrastructure investment.
This municipal statement is not evidence of utility-owned cable, a customer relationship, or an offered lot. It simply supports careful facility-inventory context; the decision on this page depends on the seller’s reel-specific legend, matching record, history, and quantity evidence.
