Overview — what we need to decide
When submitting copper items, our core decision is simple: is each line an identified continuous cable, and what quantity basis does it use — footage, cable weight, or gross loaded-reel weight? Sellers sometimes mix constructions or copy a loaded-reel scale figure as conductor weight. That makes evaluation slow and increases follow-up.
This page summarizes the seller workflow you should follow so your submission preserves conductor identification, clarifies the quantity basis, and links photos and tags to each inventory line. Follow each step and attach the required evidence fields named in the seller task to minimize questions.
Thornton is beginning outreach and planning for station-area master plans at 144th at York and North Thornton at Highway 7, considering land use, transportation, infrastructure and economic development.
That is general planning context only; it does not identify the source, condition, or availability of any copper cable offered for review.
- Separate lines by construction and preserve manufacturer marking where present
- Document whether footage is measured, documented or estimated
- Label the weight basis explicitly: gross loaded-reel, cable-only/net, or unknown
- Attach photographs that match tags, jacket legends and reel overviews
Step 1 — Split copper constructions
Create separate inventory lines for each distinct construction: bare conductor, insulated single-conductor, multi-conductor cable, and mixed recovery pieces. Retain the manufacturer marking or explicitly state ‘unknown’ when no tag is readable. Do not combine different constructions into one line even if they are on the same pallet or in the same bay.
Required evidence for this step includes clear reel/line ID, construction, conductor metal, and manufacturer or part number. If the tag is unreadable, photograph it and note the unreadable status rather than assuming a part number.
- Evidence: reel/line ID, construction, conductor metal, manufacturer/part number
- If construction differs or is unknown, list a separate line with ‘unknown’ manufacturer
Step 2 — Reconcile current quantity
Record each continuous length and identify whether footage is measured, documented, or estimated. Do not copy the original order quantity from purchase paperwork as the current footage unless you have a continuous footage measurement or an inventory-tracking record that confirms it.
For partial reels, state full/partial/cut length and include reel count. If footage is estimated, mark it as estimated and describe the method used (visual estimate, tape measure, or spool counter). Required evidence fields include continuous footage, reel count, quantity basis, and full/partial/cut length.
- Evidence: continuous footage, reel count, quantity basis, full/partial/cut length
- If footage is unknown, state ‘unknown footage’ and do not substitute a weight figure without records
Step 3 — Label the weight basis
State whether each reported weight is gross loaded-reel weight, cable-only/net conductor weight, or unknown. Do not convert gross loaded-reel weight into conductor weight. If scale figures were recorded while the reel was loaded, preserve that number but label it explicitly as gross loaded-reel weight and leave conductor weight blank or ‘unknown’ unless records exist that justify a conversion.
Required evidence fields for weight are weight, weight basis, and whether the reel or packaging is included. If a seller reports only a loaded reel scale reading and no breakdown of reel or hub weight, the proper label is ‘gross loaded-reel weight’ and conductor weight must remain unknown.
- Evidence: weight, weight basis, reel/packaging included
- Label scale readings as gross loaded-reel weight when the reel is present
Step 4 — Tie photographs to lines
Attach a photo set that ties readable tags, jacket printing (jacket legend), reel overviews, and condition notes to each inventory line. Use matching photo references so a reviewer can confirm that the tag in the close-up photo belongs to the reel shown in the overview shot.
Required photographic evidence fields include photo references, tag text, jacket legend, and condition notes. If a tag is legible in a close-up but not visible in the overview, include both images and reference them by filename or number in the inventory line.
- Evidence: photo references, tag text, jacket legend, condition notes
- Use the same reel/line ID in photo filenames or captions to avoid ambiguity
Illustrative record and common mistake
Illustrative example — not a purchased lot: CU-TC-01 is an identified insulated copper cable with a part number on the tag. It is documented as 1 partial reel with 420 ft documented and a 900 lb gross loaded reel weight; conductor weight is unknown. The status is uninstalled and photo set matched to the line.
A common mistake is advertising the entire loaded reel scale reading as conductor weight. For example, a 900 lb loaded wooden reel being advertised as 900 lb of copper misstates the conductor weight and obscures the actual inventory. The correct approach is to re-label the scale figure as gross loaded-reel weight, preserve the conductor identification, and mark conductor weight unknown unless supported by records.
- Illustrative fields: line CU-TC-01; 1 partial reel; 420 ft documented; 900 lb gross loaded reel; conductor weight unknown
- Follow the resolution: relabel gross weight, preserve conductor ID, do not invent conductor weight
What to do when inventory is unknown or incomplete
If you cannot verify conductor weight or continuous footage, be explicit: create a line that states ‘unknown footage’ or ‘conductor weight unknown’ and list all available supporting evidence (photos, tags, partial paperwork). Do not convert gross loaded-reel weight into an assumed conductor weight. If the construction is unclear, list the item as a separate line with construction set to ‘unknown’ and include the best available photos and any readable jacket legends.
Honest, explicit unknowns speed evaluation. A labeled unknown tells a reviewer exactly what follow-up is needed — a measurement, a tag close-up, or a packaging tare — instead of forcing assumptions that lead to disputes.
- If footage or conductor weight is unknown, label it clearly and attach supporting photos
- Do not mix different constructions on one line; if necessary, create multiple ‘unknown’ lines with photos
