Identify the copper construction
Begin by documenting construction details for every referenced item. Use visible jacket printing, manufacturer part numbers, and any attached cut sheets to distinguish insulated copper conductors, bare copper, and multi-conductor cable. If records do not conclusively prove conductor metal, mark the item as unconfirmed conductor metal in your submission.
Consolidate the required evidence fields for each referenced lot: manufacturer/part number, construction, conductor metal evidence, size, insulation/jacket and voltage. These fields are the basis for treating an item as identified copper rather than mixed recovery.
If a manufacturer record is available, attach it to the line item and note whether the record covers the entire reel or only partial lengths shown in photos.
- Check jacket printing and part numbers against attached manufacturer paperwork.
- Note where visible conductor ends expose copper or show other metals.
- If identification is incomplete, declare conductor metal unconfirmed rather than converting a gross weight into copper weight.
Separate inventory routes
Keep three inventory routes distinct in your submission: (1) identified continuous stock (reels or packaged continuous cable with supporting documentation), (2) removed cable pieces that are traceable by service history or cut lengths, and (3) mixed recovery-only pieces (mixed cut pieces, contaminated or noncontinuous blends).
For each route include the evidence fields: unused/removed/recovery-only status, continuous length where applicable, cut-piece mixture descriptions, contamination details, and service history. Records that tie a photo set to a line reference reduce uncertainty and help route material into the identified-stock flow instead of recovery-only.
- Label continuous reels with length and whether footage is documented or unknown.
- State contamination clearly (adhesives, nonconductive sheathing, embedded hardware).
- Keep mixed recovery pieces on separate lines with photos showing the blend.
Label the weight basis
Always state what a weight figure represents. Common bases are: gross loaded-reel weight, cable-only weight, net conductor weight, or an estimated conductor weight. Do not convert a gross loaded-reel figure into copper weight unless you have documentation that isolates conductor mass.
Include the evidence fields: scale record, gross/net/cable-only basis, whether reel or packaging is included, and whether the figure is estimated or documented. If conductor weight is unknown, state that explicitly in the line item and do not present estimates as documented facts.
- Attach scale receipts or clearly labeled photos of the scale readout.
- If a reel is present, state reel weight separately where available or mark it as included in gross weight.
- When conductor weight is unknown, mark it and keep the item in identified or recovery pathways based on other evidence.
Tie ownership and access to the lot
Provide the sale authority and storage details for each lot. Match the line reference to a photo set and identify the Jacksonville storage location and any loading constraints. This information supports a practical review and clarifies whether we can verify records on arrival.
Required evidence fields here include line reference, photo set, storage location, sale authority and loading access. When access is restricted or release authority is unclear, note that clearly so the line remains on hold until confirmed.
JAXPORT describes itself as a full-service international trade seaport at the crossroads of the national rail and highway network in Northeast Florida. That regional logistics fact does not identify a copper lot or promise movement; it simply reinforces why the actual storage location, sale authority, and loading constraints belong with the inventory.
- Name the seller or authority, and state whether documents prove their right to sell.
- Describe site access (yard, dock, indoor palletized) and whether mechanical handling is required.
- If photos do not match the stated storage location or line reference, flag the discrepancy.
Handle unknown or mixed inventory honestly
When inventory records are incomplete — for example, continuous footage is not yet documented or manufacturer data is missing — be explicit. Mark conductor metal as unconfirmed, list the available evidence, and place the item on the appropriate inventory route. This honesty prevents the common mistake of listing a gross loaded-reel weight as pure copper content.
If you have mixed recovery pieces with no manufacturer paperwork, provide a representative photo set, a description of the cut-piece mixture, and any known service history. That allows a reviewer to separate traceable, identified cable from mixed material that requires a different evaluation approach.
- Do not assume conductor percentage from a loaded-reel figure without documentation.
- Document visible signs of contamination or non-metal inclusions in photos and notes.
- Use the illustrative record format to show how to present uncertain lines.
Illustrative record and common mistake
Use the following illustrative example format when submitting lines to show how to present the necessary fields and to avoid the stated mistake.
Common mistake: advertising a 900 lb loaded wooden reel as 900 lb of copper. Correct approach: report the 900 lb as gross loaded-reel weight; list conductor weight as unknown unless you supply a documented conductor-only weight; and separate any visible cut or recovery pieces onto their own line.
- Include an explicit note that the illustrative record is not a purchased lot when using it as a template.
- Attach manufacturer records and scale receipts when available to move a line from 'conductor weight unknown' to 'documented conductor weight'.
