What this page is for
This page explains how to present copper conductor inventory from Baton Rouge so buyers can tell identified cables with usable footage apart from mixed, weight‑based recovery material. It focuses on the evidence and line-item practices sellers should supply: clear markings, separate inventory forms for different constructions, explicit weight bases, and preserved release documentation. Follow the steps below to avoid misrepresenting gross loaded-reel figures as conductor weight and to keep short mixed pieces separate from identified lengths.
Step 1 — Verify the conductor record
Start with visible and documented identity. Use jacket printing, part numbers, manufacturer labels, or matching job records to confirm the material is copper and to capture conductor construction (tinned, stranded, solid), size, and conductor count. If the surface appears silvery, state whether that is tinned copper, aluminum, or another plated finish and keep any uncertainty explicit. For each line, record the metal evidence, manufacturer/part number, size and conductor count, and insulation/construction so reviewers can judge whether footage is an identified cable length or merely mixed pieces.
- Metal evidence — note visual, stamped, or labeled cues
- Manufacturer/part number — copy any printing or tags
- Size and conductor count — list AWG/mm and number of conductors
- Insulation/construction — PVC, XLPE, tinned, shielded, etc.
Step 2 — Separate inventory forms
List bare wire, insulated single-conductor, multi-conductor cable, continuous reels, cut lengths, and mixed recovery-only pieces as distinct inventory lines. A continuous reel with documented footage is not the same as a bucket of short mixed cuts. Provide continuous length where known and a piece or reel reference for traceability. If you must report mixed pieces, do so on separate lines with weight-based evidence and a clear condition/history entry describing how the pieces were obtained or cut.
- Construction — treat bare, insulated, multi‑conductor separately
- Continuous length — document or mark as unknown if not measured
- Piece/reel reference — give each reel or bundle a unique ID
- Condition/history — state whether material was de‑installed, pulled, or collected as mixed pieces
Step 3 — Label every weight explicitly
Every weight figure must state the basis: gross loaded-reel, cable-only, conductor-only, net, measured, estimated, or unknown. Do not convert gross loaded-reel weight into conductor weight unless you have documentation (manufacturer spool weight, prior scale ticket for cable-only, or a verified conductor weight) to support that conversion. If a reel scale ticket shows 900 lb gross loaded weight and you do not have a documented conductor-only figure, report it as “900 lb gross loaded reel; conductor weight unknown.” Include the weight value, weight basis, scale or document source, and whether reel or packaging is included.
The Port of Greater Baton Rouge is located at the Mississippi River and Gulf Intracoastal Waterway convergence, with direct access to ship, barge, truck and rail; its jurisdiction includes 85 miles of river and five parishes. That fact is relevant only to why a large reel seller should state its actual storage location, release contact and loading constraints; it is not a transport commitment or proof of a local transaction.
- Weight value — numeric figure
- Weight basis — gross, cable-only, conductor-only, estimated, or unknown
- Scale/document source — attach tickets or state origin
- Reel/packaging inclusion — note wood reels, bands, or chocks
Step 4 — Preserve release and site evidence
Before you alter or separate material, photograph reels, markings, and visible contamination or damage. Record release authority or ownership documentation, how the material can be accessed and loaded, and any site limitations. These photos and documents help confirm that the line-item identity was preserved and that gross weights reflect the material as found. Include photo references, release authority, site/access notes, and contamination/damage descriptions with each inventory line.
- Photo references — filenames or links to images captured on site
- Release authority — who authorized removal or sale (name/role)
- Site/access — loading area, equipment access notes
- Contamination/damage — visible oil, sand, or insulation degradation
How to treat unknown or incomplete inventory
When footage or conductor-only weight is unknown, be explicit: split identified reels (even if footage is unmeasured) from mixed short pieces and list the weight basis as unknown or gross. Do not combine short mixed pieces with an identified continuous cable just to produce a larger conductor-weight figure. If you cannot produce manufacturer or spool documentation, leave conductor weight as unknown and provide the required evidence fields for later verification. The record should preserve the evidence basis for any later lot-specific discussion.
- Split lines when doubt exists — identified reel vs mixed pieces
- Report unknowns honestly — leave conductor weight blank if undocumented
- Provide evidence for later verification rather than estimating conductor weight
Illustrative record (use as a submission model)
Use a clear reference and the evidence fields below. Example: reference CU-BR-03 described as identified insulated copper conductor, listed as a 900 lb gross loaded reel with conductor weight unknown and continuous footage not yet documented. The condition field must state who will document condition and when. This model shows the exact wording approach sellers should use to avoid the common mistake of presenting gross reel weight as copper content.
- Reference: CU-BR-03
- Material: identified insulated copper conductor
- Quantity: 900 lb gross loaded reel; conductor weight unknown
- Length: continuous footage not yet documented
- Condition: seller to document
