WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Copper Wire & Cable Buyers in St. Louis, Missouri

We buy copper wire and cable in St. Louis, Missouri. Send the material markings, continuous footage where known, and a clear weight basis for every reel or mixed piece, along with condition and release information. This page helps keep identified cable inventory separate from gross loaded-reel figures, rather than treating a scale ticket as a conductor-only quantity.

Copper reels versus recovery material St. Louis, Missouri

SELLER TASK / BEFORE YOUR QUOTE

Is each quantity usable identified cable footage, or a gross weight that includes reel, insulation, packaging, or mixed pieces?

THE PROBLEM TO RESOLVE

Identified copper reels, insulated assemblies, and mixed recovery pieces can be reported as one weight even though their evidence and review questions differ.

MAKE THIS DECISION

Is each quantity usable identified cable footage, or a gross weight that includes reel, insulation, packaging, or mixed pieces?

Evidence to have ready

  • conductor metal
  • construction
  • size
  • manufacturer/part number
  • continuous footage
  • piece type
  • mixture
  • contamination
  • weight basis
  • weight
  • reel/packaging included
  • quantity basis
  • condition
  • storage history
  • site
  • release authority

Avoid this record: A 900 lb loaded wooden reel is advertised as 900 lb of copper.

Better record: Report the scale figure as gross loaded-reel weight, preserve the reel and cable distinction, and leave conductor weight unknown unless separately documented.

Illustrative example — not a purchased St. Louis lot

Worked inventory record

reference
CU-STL-01
identity
identified insulated copper conductor
weight
900 lb gross loaded reel; conductor weight unknown
length
continuous footage not yet documented

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

What we need to know first

Start by separating identified continuous cable from recovery pieces and loaded reels. The central decision is whether each quantity represents usable identified footage or a gross weight that includes reel, insulation, packaging, or mixed fragments.

Follow the verification step to confirm conductor metal, construction, size, and manufacturer or part number where available. Keep bare conductor, insulated single-conductor, and multi-conductor assemblies documented separately so reviewers evaluate like items together and don’t conflate distinct evidence sets.

  • State conductor metal and construction (copper; insulated, bare, multi-conductor).
  • Record size and any manufacturer/part numbers printed on the jacket.
  • Keep continuous footage listings separate from cutoffs and mixed recovery piles.

Labeling weight and quantity basis

Every weight figure you provide must include the weight basis. Explicitly label whether the weight is gross loaded-reel, cable-only, net conductor, estimated, or unknown. Retain and report reel count and any packaging that remained on the scale during weighing.

When footage is known, provide continuous footage for identified cable. When footage is unknown, report the scale figure as gross and mark conductor weight as unknown unless a separate conductor-only scale or manufacturer spool documentation is available.

  • Gross loaded-reel — state that scale figure includes reel and packaging.
  • Cable-only or net conductor — provide documentary proof or separate scale evidence.
  • Estimated — explain the estimation method and uncertainty range.

Separate inventory routes for review

List identified continuous stock on one route and mixed recovery-only pieces, cutoffs, and uncertain material on another. Review requirements differ: continuous identified footage is evaluated by construction and length; mixed fragments require inspection for contamination, mixture, and usable conductor content.

If you cannot document footage or identity, be explicit. It is better to mark items as unknown than to conflate mixed gross weight with conductor-only quantities.

  • Continuous footage — provide reels or spool labels and footage counts.
  • Mixed recovery — describe piece types, visible sheath types, and contamination.
  • Unknowns — flag as unknown and include photos and scale receipts.

Record condition, storage and release

Document visible damage, storage exposure, exact site, ownership or possession, and who can authorize release. These facts let a buyer understand access and release constraints without confusing logistics with the cable’s conductor weight.

Include any available loading or handling details (for example, whether reels are on wooden saddles or loose), but do not convert those details into assumed conductor weight without separate evidence.

SLDC describes industry and business development as strengthening business and industry through expansion, retention and attraction partnerships in the City of St. Louis. That citywide description does not establish a seller, customer, or available material. For a copper lot, the relevant records are still the cable identity, continuous footage or weight basis, condition, location, and authority to release it.

  • Condition — water, corrosion, burns, or physical cuts.
  • Storage history — indoor, outdoor, covered, or submerged exposure.
  • Release authority — name and contact for authorization to examine or move material.

When inventory is unknown or incomplete

If you cannot document conductor identity or continuous footage, present the measurable facts you do have: gross scale weights, reel counts, photos showing jacket markings, and any manufacturer labels. Report those scale numbers as gross weights and clearly mark the conductor weight as unknown.

Do not convert a loaded-reel gross figure into a conductor-only figure unless you can supply a separate documented method or prior test demonstrating conductor net weight. If you have an inspected sample or a dismantled reel with recorded conductor-only scale, attach that documentation to change the weight basis.

  • Provide scale ticket images with reel present and note whether packaging or wood is included.
  • Attach photos of jacket printing or part numbers to support identification.
  • If footage is later measured, update records and change the quantity basis from gross to footage or net as applicable.

Illustrative record and common mistake

A frequent misreporting is treating a loaded wooden reel scale figure as the conductor weight. The correct approach is to report the scale figure as gross loaded-reel weight and preserve the reel-versus-cable distinction until separate documentation proves conductor-only weight.

The brief’s illustrative example shows how to record such a lot without overstating conductor quantity: keep the reel and cable descriptors distinct and record conductor weight as unknown when only a gross scale figure exists.

  • Mistake: Listing 900 lb loaded reel as 900 lb of copper conductor.
  • Correct: Report 900 lb gross loaded-reel; denote conductor weight unknown unless verified.

Before the first call

Your questions,
answered.

Can a loaded-reel scale figure be called copper weight?

No. If the only measurement you have is a loaded-reel scale ticket, report that figure as gross loaded-reel weight and label the weight basis accordingly. Follow the seller steps: verify conductor identity where possible, separate continuous footage from mixed pieces, and retain reel count. If you later produce a separate conductor-only scale or documented reel tare/packaging deduction, update the record to show net conductor weight; until then, list conductor weight as unknown.

How should identified copper reels differ from mixed recovery pieces?

Keep identified reels with continuous footage, jacket printing, or manufacturer part numbers on a separate inventory route from mixed recovery piles. For reels, provide footage counts, labels, and weight basis (gross or net). For mixed recovery pieces, document piece type, contamination, mixture, and any visible conductor exposure. Use the separate routes step to ensure reviewers apply the right evidence fields for each kind and don’t conflate footage-based lots with gross-weight fragments.

What records support copper identification when appearance is uncertain?

Provide jacket printing photos, manufacturer or part number listings, and any vendor or job records that reference the lot. If those are absent, supply scale tickets, multiple close-up photos showing conductor cross-sections or jacket markings, and a written description of construction. Follow the verify conductor identity step and include the required evidence fields (conductor metal, construction, size, manufacturer/part number). If uncertainty remains, mark identity or conductor weight as unknown rather than substituting an assumed net figure.

If my listing mistakenly showed loaded-reel weight as copper, how do I fix it?

Correct the listing by changing the weight basis label to 'gross loaded-reel' and preserve separate fields for reel and conductor. Add any available proof (scale ticket showing reel present, photos, or a dismantled reel conductor-only scale) and update the conductor weight field to 'unknown' unless you can document net conductor weight. This follows the resolution: report gross weight, preserve reel/cable distinction, and avoid claiming conductor weight without documentation.

Sources

Further reading

  1. St. Louis Development Corporation
  2. City of St. Louis Port Authority
Call now