WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Sell Control and Tray Cable in Salt Lake City, Utah

Sell surplus control and tray cable from Salt Lake City, Utah through Industrial Wire Buyer. For multi-conductor reels and cut lengths, review begins by separating exact printed designations, conductor or pair counts, shielding, continuous footage, condition, and release details. Similar-looking jackets or a cable’s prior tray location do not establish the same specification.

Control and tray specifications Salt Lake City, Utah

SELLER TASK / BEFORE YOUR QUOTE

Which control or tray cable lines are genuinely the same specification, and what continuous length and condition does each contain?

THE PROBLEM TO RESOLVE

Industrial inventory can combine similar-looking control and tray cable even when conductor or pair counts, shielding, jacket markings and service history differ.

MAKE THIS DECISION

Which control or tray cable lines are genuinely the same specification, and what continuous length and condition does each contain?

Evidence to have ready

  • reel ID
  • printed designation
  • manufacturer or part number
  • marked voltage
  • conductor count
  • pair count
  • gauge
  • metal
  • shielding
  • continuous length
  • quantity basis
  • fitted ends
  • jacket condition
  • service history
  • line or photo reference
  • location
  • release authority

Avoid this record: All cable removed from a tray is classified as Type TC and similar reels are combined into one footage total.

Better record: Use the actual markings and records, preserve conductor, pair and shield differences, and list every continuous length separately with unknown designations left explicit.

Illustrative fictional record — not a purchased lot

Worked inventory record

reference
SL-CT-04
designation
TC-ER marking; 12 conductors, 16 AWG
shielding
unknown
quantity
240 ft continuous, measured
condition
removed cable; fitted ends present

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Transcribe the exact control or tray designation

Create a line for each reel or cut length and photograph the readable jacket printing. Record TC, TC-ER, PLTC, or another exact designation only when it appears on the material or a matching record. Add the manufacturer, part number when available, marked voltage, and a stable reel ID.

Salt Lake City’s Department of Economic Development says the city is home to more than 20,000 businesses and identifies logistics, manufacturing, distribution, healthcare and life sciences among its key industries. It provides local industry context only and does not identify any particular cable stock. For this task, the relevant seller action is to preserve each multi-conductor product’s printed identity rather than treating a facility source or tray location as the designation.

  • Stable reel or line reference
  • Printed designation
  • Manufacturer or part number
  • Marked voltage and jacket-photo reference

Keep conductor and pair differences visible

List conductor count, pair count, gauge, conductor metal, and shielding in separate fields. A 12-conductor cable, six-pair cable, shielded cable, and unshielded cable may look alike in a stored group while remaining distinct inventory lines. Do not use an outer jacket appearance to fill a missing shield field.

If a construction detail cannot be verified without altering the cable, leave it unknown and retain the available marking and photo. The goal is an accurate offer record, not an assumed classification.

  • Conductor count
  • Pair count
  • Gauge and metal
  • Shielding or explicit unknown

Report continuous length and history for each line

Give every reel or cut its own continuous footage and quantity basis. State whether the cable is unused, removed, or unknown history; then note fitted ends, jacket condition, and any known storage facts. A total of several short cuts should not be represented as one continuous run.

The specific inventory mistake is calling all cable removed from a tray Type TC and combining the footage. The fix is to retain the printed designation, conductor or pair differences, and each continuous length separately.

  • Continuous length and quantity basis
  • Fitted ends
  • Jacket condition
  • Unused, removed, or unknown service history

Link photos, location, and release status

Use the same line reference in the inventory and every photo filename. Add the storage location, access or loading limitations, and the party authorized to release the cable. If those details are incomplete, keep the line in the list with a clear pending or unknown note rather than assuming it may be released.

This evidence set lets the buyer discuss an individual control or tray line without accidentally combining it with broader industrial cable or a different building-wire reel.

  • Line and photo reference
  • Storage location
  • Known access or loading limits
  • Release authority or pending status

Worked fictional multi-conductor record

Illustrative fictional record—not a purchased lot: SL-CT-04; TC-ER marking; 12 conductors, 16 AWG; shielding unknown; 240 ft continuous measured; removed cable with fitted ends present. The unknown shield is retained instead of inferred from the designation or the prior tray location.

Use a separate record when another reel has a different pair count, gauge, marking, length, or history. That is the workable resolution for a mixed multi-conductor inventory.

  • Reference: SL-CT-04
  • Designation: TC-ER marking
  • Shielding: unknown
  • Quantity: 240 ft continuous measured

Before the first call

Your questions,
answered.

Is cable found in a tray automatically Type TC?

No. Record the printed designation on the cable or matching product record. A tray location is background, not a product designation; if the printing is unclear, mark it unknown.

How should conductor and pair counts be reported?

Use separate fields for conductor count, pair count, gauge, metal, and shielding. Do not combine these values across reels that only look similar.

Can similar control-cable reels be grouped?

Only when their printed designation, construction fields, continuous length, condition, and release situation genuinely match. Otherwise list each reel or cut separately.

How should removed cable with missing markings be listed?

State the measured or estimated continuous length, fitted ends, jacket condition, and known service history, then mark the designation and shielding unknown. Keep it separate from documented lines.

Sources

Further reading

  1. Salt Lake City Department of Economic Development — Business Development
Call now