Why distinguish footage from weight basis
A Macon-Bibb County seller may need to decide whether to report each line as a construction with usable length or as a mixture reported by weight. That choice changes how a lot is inspected and what supporting evidence is required. A clear inventory record treats continuous, identified cable as footage-based items and mixed, damaged or cutoff material as weight-based lots. Do not conflate gross loaded-reel weight with conductor-only weight without direct evidence.
Use simple, verifiable records to make the distinction: printed labels on the reel, matching job tickets, or tag numbers tied to cut lengths. When such identification is present, list continuous footage and the construction (for example: single insulated conductor, multi-conductor cable, or bare conductor). When identification is absent or material is mixed, list measured weight and the weight basis (gross reel, stripped conductor, or mixed recovery).
Macon-Bibb County Industrial Authority lists aerospace, food processing, warehousing and distribution, automotive and advanced manufacturing as leading industries in Macon. This broad industry list is not evidence of copper inventory or demand. It merely provides local context for asking a facility seller to distinguish identified cable from mixed material and state the quantity basis honestly.
- Continuous footage → list as footage with construction details
- Mixed/damaged/cutoffs → list as weight with explicit weight basis
- Gross loaded reel → report as gross unless conductor-only weight is measured
Step 1 — Identify construction and mark uncertainty
Follow the brief’s step to identify construction using labels, printing or matching records. For each line, record the metal basis, the construction type (bare, insulated, multi-conductor), size/count and insulation condition. If identification is uncertain, mark that uncertainty explicitly in the lot record rather than guessing conductor content.
Examples of acceptable identification: factory printing on jacket, attached tags with job IDs, cross-referenced cutting records. When none of these exist, mark the line as “construction unverified” and move it to the mixed or gross-weight category until supplementary evidence is provided.
- Record: metal basis; construction; size/count; insulation
- If uncertain: flag the item and do not convert gross reel weight to conductor-only weight
Step 2 — Separate footage and weight quantities
List continuous footage for identified cable and separately record measured weight for recovery-oriented material. For footage lines, include continuous footage, construction, and any available length verification method (tag, printed marker, or job sheet). For weight lines, record the weight value, weight basis (gross loaded reel, loose cutoffs, or bundled mixed), and the quantity method used (scale weight, estimated gross, or per-reel measurement).
If a loaded reel is weighed without removing the reel, record the result as gross loaded-reel weight and mark conductor weight unknown unless a verified conductor-only weight is provided. This prevents overstating conductor mass when substantial reel, hub, or packing weight may be included.
- Footage entries: continuous footage, construction, length verification
- Weight entries: weight value, weight basis, measurement method
- Gross reel measurements must be reported as gross if conductor-only isn’t supported
Step 3 — Keep mixtures and cutoffs visible
Separate mixed cutoffs and damaged material from identified lengths, and do so without cutting or stripping conductors. Record mixture details: what materials are present, contamination or non-metal inclusions, cutoff status, and overall condition. If material is intermingled and cannot be separated without processing, treat it as a mixture and record an explicit weight-basis description.
Keeping mixtures visible and distinct in records lets a reviewer determine whether further inspection or onsite separation is warranted. It also preserves evidence needed to support any later claim about conductor weight versus gross lot weight.
- Do not cut/strip to separate — keep mixed items distinct
- Record mixture, contamination, cutoff status, and condition
Step 4 — Document release context and access
Provide ownership, storage location (ZIP), and loading access information for any lot-specific discussion. Evidence of authority to release material and clear loading access reduces delays in arranging inspection. Include any known job or lot identifiers and whether the material is staged on pallets, reels, or loose bundles.
When ownership or authority is uncertain, state that clearly. Missing release context does not disqualify a lot from review, but it does delay a conclusive basis decision until the authority and physical access are documented.
- Record: owner/authority; storage ZIP; loading access
- Note staging method: reels, pallets, loose bundles; include handling constraints
Illustrative record and common mistake to avoid
Common seller mistake: describing a 900 lb loaded wooden reel simply as “900 lb of copper.” The correct approach is to report that measurement as 900 lb gross loaded reel and to state conductor weight unknown unless you have evidence separating conductor weight from reel/hub/packing weight. The brief’s illustrative record captures this principle: line CU-MB-01 is an identified insulated copper conductor on a 900 lb gross loaded reel with conductor weight unknown and length not documented.
If you have only gross measurements and no verified conductor-only weights, do not convert gross weight into assumed conductor weight in your submission. Instead, flag the lot as gross-weight with conductor weight unknown and provide any documentation you do have so the reviewer can decide whether onsite measurement or separation is warranted.
- Illustrative record: CU-MB-01 — 900 lb gross loaded reel; conductor weight unknown; length not documented
- Mistake to avoid: reporting gross loaded-reel weight as conductor-only copper weight
