Step 1 — Reconcile the physical lot
Begin by matching each offered reel or coil to your most recent inventory export or project record. For every line, record the reel ID, part number, and current footage observed. Do not copy original invoice footage unless you confirmed it by measurement or clear tag evidence.
Flag discrepancies between the recorded original footage and what is physically present. Where footage is estimated rather than measured, label it explicitly as an estimate and give the basis (e.g., partial spool with visible jacket-print remaining, or photographic evidence of tag showing length). Include a clear quantity basis for each line: documented, measured, or estimated.
Macon-Bibb County says Middle Georgia Regional Airport is receiving $4,012,500 in Georgia Department of Transportation grants for T-hangars, a box hangar and an East Drive extension; the East Drive work is intended to provide access and utilities to an area for future development. The announcement identifies no cable inventory. It is limited project context: a seller with changed-scope material still needs to document the actual reels offered, current balances and authority to release them.
- Evidence fields required: reel ID, part number, current footage, quantity basis
- Mark whether footage is measured, documented from records, or estimated
- Keep a reconciliation log linking the inventory export line to the physical reel ID
Step 2 — Separate availability states
Classify material into at least three availability states: full reels (unbroken continuous reels where the documented footage matches or is supported by tag/jacket-print), partial reels (continuous lengths remaining on original reels, estimated or measured), and cut lengths or loose cable.
Clearly mark any reels or lengths that are reserved, release-pending, or otherwise restricted. For release-pending items, record the release authority or contact and state whether approval is unknown, pending, or confirmed.
- Evidence fields required: condition/status, continuous length, release authority
- Do not commingle full and partial reels when proposing a single lot unless you explicitly define quantities and conditions for each subset
- If any lines are reserved, annotate the reservation and do not present those quantities as available
Step 3 — Tie evidence to the lot
Attach photos that show the reel tag, jacket print, and any line IDs. Use line IDs both in the photo filename and in your inventory export so a reviewer can cross-check without intermediaries. State the storage ZIP, lot grouping, and any access limits that affect inspection or pickup.
Where possible, capture sequence photos: a wide shot showing lot grouping and storage area, a mid shot showing the reel in context, and a close-up of jacket print and tag. For partial reels include a reference object or measuring tape in the photo to help estimate remaining footage when a measured value is not available.
- Evidence fields required: photo references, storage ZIP, lot grouping, access limits
- Use the same line ID in tags, photos and your upload filenames
- Note any site restrictions or access timetables that could affect inspection or loading
Step 4 — Choose a next step and state it clearly
For each submission, state whether you want a quote, an inspection discussion, or a provisional review. Provide requested next-step details plus expected loading resources and site timetable. A submission is not acceptance; the purchasing discussion depends on the evidence you provide and any outstanding approvals.
If approval or final release is pending, mark that clearly and preserve any pending balances or approval as unknown. Do not infer availability from original invoice footage — always mark current balance and the evidence basis for it.
- Evidence fields required: requested next step, loading resources, site timetable
- If requesting an inspection discussion, include available dates and any site access instructions
- If choosing provisional review, specify which lines should be reviewed first
Handling unknown or incomplete inventory
If you cannot measure remaining footage, do not substitute original invoice footage. Instead, state the original footage, then mark the current footage as unknown and supply photos showing jacket-print and tag. Use a conservative estimate and label it as such, or mark the footage as undetermined and offer inspection.
When release authority is unclear, provide the contact or department that controls release and note whether written approval is expected. If no contact is available, mark the line as release authority unknown. Treat those items as having unknown availability until release evidence is supplied.
- Never present original invoice footage as remaining quantity by default
- If footage is unknown, provide the reasons and photographic evidence; state whether the footage is an estimate
- List any missing evidence fields and a plan to collect them
Illustrative record and how to present it
Provide an illustrative record for each lot or line using the same labels we request. Example entries should be clearly marked as illustrative and not a purchased lot. Include line ID, quantity with documented versus estimated split, condition, and location detail even if ZIP is unknown.
Use the example to show how you will present full reels versus partial reels, and how pending release items will be flagged. This helps accelerate review and reduces follow-up questions.
- Use the exact evidence fields listed in requiredEvidence when preparing your submission
- Label illustrative records clearly: 'Illustrative only — not a purchased lot'
- Include one photo set per line ID
