WIRE & CABLE BUYING INQUIRIESCOMMERCIAL / INDUSTRIAL

saleselectricalbuyers@gmail.com
Electrical cable reels — illustrative inventory photograph

SELL YOUR SURPLUS / MATERIAL-SPECIFIC BUYING

Sell Multi-Reel Cable Lots in Macon-Bibb County, Georgia

We buy multi-reel wire and cable lots in Macon-Bibb County, Georgia. When a list spans more than one storage site, build one traceable record per reel or continuous piece. Tie every line to its photos, footage basis, site group, release contact and known loading constraints so the lot can be reviewed without hiding unlike inventory behind one total.

Multi-reel and multi-site lots Macon-Bibb County, Georgia

SELLER TASK / BEFORE YOUR QUOTE

Can another reviewer match every reel to its specification, photos, storage site, release contact and loading limits?

THE PROBLEM TO RESOLVE

A warehouse or industrial-park closeout can hide different specifications, reel lengths and storage sites behind one grand-total figure.

MAKE THIS DECISION

Can another reviewer match every reel to its specification, photos, storage site, release contact and loading limits?

Evidence to have ready

  • line/reel ID
  • photo filenames
  • designation
  • reel count
  • footage per reel
  • quantity basis
  • storage ZIP
  • site group
  • release authority
  • dimensions
  • gross/net/unknown weight
  • loading equipment
  • access limits

Avoid this record: A grand-total footage figure hides unlike reels and different storage sites.

Better record: Use one row per reel or continuous piece and label quantity and weight bases.

Illustrative only — not a purchased lot

Worked inventory record

line_1
BL-MB-01; 500 ft measured; Site A
line_2
BL-MB-02; 90 ft estimated; Site B
photos
IDs repeated in filenames
loading
forklift unknown

BUILD YOUR INVENTORY

One reel. One line.
A clearer quote request.

Keep each continuous length distinct. Two 100-foot pieces are not one 200-foot run. Record unknown markings or quantities as unknown; do not change, cut or test material to complete this worksheet.

Start with the blank inventory CSV. Use a spreadsheet or the optional worksheet below. Add labels and photo references to your records; email photographs separately to saleselectricalbuyers@gmail.com.

Why one row per reel matters

Large inventories that show only a single grand-total footage hide differences that change handling, verified quantity and eligibility. A closeout can contain different constructions, reel cores and partial lengths at more than one storage site. Using individual rows for each continuous reel or continuous piece preserves the buyer’s ability to confirm what is present and where it sits for release and loading planning.

The Georgia Department of Economic Development identifies Airport North Industrial Park as a 120-acre GRAD Select site at 7200 Industrial Highway, on U.S. 41 west of I-75 and less than two miles from Middle Georgia Regional Airport; utilities are on-site and railroad access is planned via a Norfolk Southern spur. That location description does not show that any cable is stored there or that transport is included. Its practical relevance is simply to prompt a seller to state the real storage site, access limits and loading facts for the offered lot.

  • Preserves footage basis (measured vs estimated) per reel
  • Keeps weight and dimension bases tied to each physical item
  • Enables exact photo-to-reel cross-reference for remote review

Required per-reel fields (what to supply)

Follow the brief’s evidence fields exactly when assembling a spreadsheet and photos. Each reel or continuous piece must have a stable line or reel ID used in the spreadsheet and repeated in the filenames of every related photograph. Record the footage for that reel and whether it is measured or estimated, and specify the quantity basis (feet, pieces, reels).

  • line/reel ID — one reference per reel or identical group
  • photo filenames — include the line/reel ID in each filename
  • designation — product description and conductor type
  • reel count, footage per reel, quantity basis
  • storage ZIP, site group, and stated release authority (contact)
  • dimensions, gross/net/unknown weight, loading equipment, access limits

Grouping by real site and release authority

When reels are at different locations, separate them into distinct site groups with clear storage ZIP and the named release authority for each site. State explicitly whether you are offering one lot that spans sites, or defined groups that are to be handled and released together. This allows a reviewer to answer the decision question: can every reel be matched to its specification, photo, storage site and loading limits?

  • Site group — label as Site A, Site B, etc., and include storage ZIP
  • Release authority — name and role (owner, property manager, or contact)
  • State whether the listing is one combined lot or multiple lots defined by site

Handling constraints and how to report them

Provide dimensions (length/width/height or reel diameter), a weight basis (gross, net or unknown), and the loading equipment or access that would be needed. If you do not know exact weights, mark ‘unknown’ rather than substituting an assumed figure. Report any surface or gate access limits, clearances, or local restrictions that affect loading. Remember these fields are for discussion only and to help plan a remote review; they do not substitute for a final on-site inspection.

  • Dimensions — reel diameter or crate dimensions
  • Weight basis — gross/net/unknown weight
  • Loading equipment — forklift, crane, roll-off, etc., or state unknown
  • Access limits — gate hours, surface conditions, clearance heights

Handling unknown or incomplete inventory honestly

If footage, core condition, or exact weights are unknown, flag those fields explicitly and provide the best available supporting photo showing the reel tag, core, or end-of-cable. Use one row per reel and include an ‘est.’ or ‘measured’ marker in the footage field. Do not combine measured and estimated footage into a single grand-total row. Providing clear photo IDs tied to line IDs allows a remote reviewer to confirm what remains uncertain and to recommend whether an in-person verification is needed before any decision.

  • Mark footage as ‘measured’ or ‘estimated’ per reel
  • Include a photo that shows the reel tag or a ruler/scale in-frame when possible
  • If loading equipment or weight is unknown, state ‘unknown’ rather than guessing

Illustrative record and common mistake to avoid

Use the supplied illustrative record as a template for how you label lines and photos. The common mistake is a single grand-total footage figure that masks different footage bases and multiple sites. The resolution is to use one spreadsheet row per reel and to specify quantity and weight bases explicitly so a second reviewer can match entries to photos and sites without re-inspection.

  • Illustrative example (not a purchased lot): BL-MB-01; 500 ft measured; Site A
  • BL-MB-02; 90 ft estimated; Site B — photos repeat IDs in filenames
  • Loading example field: forklift unknown

Before the first call

Your questions,
answered.

Can one inquiry cover reels at two sites?

Yes, but only if you provide explicit site grouping and release authority for each reel. In your spreadsheet use separate rows for reels at Site A and Site B, include storage ZIP, name the release authority for each site, and repeat the site label in each photo filename. State whether you intend to sell as one combined lot spanning both sites or as defined groups. If any site has unknown access or loading constraints, mark those fields ‘unknown’ so the reviewer can flag the need for an on-site check.

How should identical reels retain individual footage entries?

Give each physical reel its own line/reel ID even when reels are identical. In the footage field mark each as ‘measured’ or ‘estimated’ and record footage per reel rather than a summed footage. Repeat the line/reel ID in every related photo filename and include any reel tags visible in photos. This preserves per-reel quantity basis and prevents a grand-total from hiding shorter or partial reels.

What loading and dimension fields matter for remote review?

Report reel diameter or crate dimensions, and indicate gross, net or unknown weight basis. State the loading equipment you expect will be needed (forklift, crane, roll-off, etc.) or write ‘unknown’ if you cannot confirm. Include access limits such as gate hours, clearance heights, or surface conditions. These entries let a remote reviewer assess whether the listed handling equipment can access the specific site(s) and whether an on-site inspection is required before any decision.

What should I do if footage or weight is uncertain?

Mark the specific fields as ‘estimated’ or ‘unknown’ and supply clear photos that include the reel tag or an in-frame measurement reference. Keep one row per reel and do not roll estimated and measured footage into a single total. This enables the reviewer to separate confirmed quantities from assumptions and to request targeted re-measurement where necessary.

How does the provided mistake/resolution apply to my submission?

If your current inventory shows only a grand-total footage, convert it into one row per reel or continuous piece, label each row with its quantity and weight basis, and repeat IDs in the photo filenames. The mistake described — hiding unlike reels and different sites behind one grand total — is corrected by the stated resolution: discrete rows, explicit footage basis, and per-site grouping so a second reviewer can independently match reels to photos, sites and release contacts.

Sources

Further reading

  1. Georgia Department of Economic Development: Airport North Industrial Park GRAD Select certification
Call now